JDS Uniphase CleanBlast FCL-P1005 User Manual page 2

Notice
Copyright
Trademarks
Patents
Tested Equipment
FCC Information
European Union
Independent
Laboratory Testing
ii
Every effort was made to ensure that the information in this document was accurate at
the time of printing. However, information is subject to change without notice, and JDSU
reserves the right to provide an addendum to this document with information not available
at the time that this document was created.
© Copyright 2009 JDSU, LLC. All rights reserved. JDSU, Enabling Broadband and Optical
Innovation, and its logo are trademarks of JDSU, LLC. All other trademarks and registered
trademarks are the property of their respective owners. No part of this guide may be
reproduced or transmitted electronically or otherwise without written permission of the
publisher.
JDSU is a trademark of JDSU in the United States and other countries.
CleanBlast is a registered trademark of JDSU.
RibbonDrive is a trademark of JDSU.
Hirose is a trademark of Hirose Electric Group.
MTP is a registered trademark of US Conec, Ltd.
IBC is a trademark of US Conec, Ltd.
Molex is a registered trademark of Molex Incorporated.
OptiTip and OptiTap are trademarks of Corning Incorporated.
Sony is a registered trademark of Sony Corporation.
Specifications, terms, and conditions are subject to change without notice. All trademarks
and registered trademarks are the property of their respective companies.
RibbonDrive Tips: US Patent No. 6,751,017 / 6,879,439
CleanBlast: US Patent No. 7,232.262
All pre-qualification tests were performed internally at JDSU, while all final tests were
performed externally at an independent, accredited laboratory. This external testing
guarantees the unerring objectivity and authoritative compliance of all test results.
JDSU's Commerce and Government Entities (CAGE) code under the North Atlantic Treaty
Organization (NATO) is 0L8C3.
Electronic test equipment is exempt from Part 15 compliance (FCC) in the United States.
Electronic test equipment is subject to the EMC Directive in the European Union. The
EN61326 standard prescribes both emission and immunity requirements for laboratory,
measurement, and control equipment. This unit has been tested and found to comply with
the limits for a Class A digital device.
This unit has undergone extensive testing according to the European Union Directive and
Standards.