Table of Contents
Advertisement
B.4
Electrical appliance Technical data
Type Code
+7IIKDAOMCA
+7IINDAOMCA
+7IILDAOMCA
+7IIKDAOMCA
+7IILDBLMCA
EFT71
+7IIKDBLMCA
+7FTEDCSI0
+7FTEDCSQ0
+7IIKIAOMCA
+7IIKDAOMEA
+7IILDAOMEA
+7IIMDAOMEA
+7IIMDBLMEA
+7IIKDBLMEA
+7FTEHCSI0
EFT72
+7FTEHCPI0
+7FTEHCSQ0
+7IIMIAOMEA
+7IIKIAOMEA
+7FTEHCPIN
1.
minimum recommended
C
GENERAL INFORMATION
WARNING
Refer to "Safety Information".
C.1
Introduction
Given below is some information regarding the intended use of
this appliance, its testing, and a description of the symbols
used (that identifies the type of warning), the definitions of
terms used in the manual and useful information for the
appliance user.
C.2
Intended use and restrictions
This appliance is designed for cooking food. It is intended for
commercial use.
This appliance must not be used by minors and/or adults
with limited physical, sensory or mental abilities or with-
out adequate experience and knowledge regarding its use.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
CAUTION
The machine is not suitable for installation
outdoors and/or in places exposed to
atmospheric agents (rain, direct sunlight,
etc.).
C.3
Testing and inspection
Our appliances have been designed and optimized, with
laboratory testing, in order to obtain high performance and
efficiency.
Passing of the tests (visual inspection - gas/electrical test -
functional test) is guaranteed and certified by the specific
enclosures.
14
Power
supply
Models
voltage
V
380 – 400
400mm
230
380 – 400
800mm
230
Frequency
Phases
Hz
3 / 3+N
50 — 60
3
3 / 3+N
50 – 60
3
C.4
Copyright
This manual is intended solely for consultation by the operator
and can only be given to third parties with the permission of
Electrolux Professional SpA.
C.5
Keeping the manual
The manual must be carefully kept for the entire life of the
machine, until scrapping. The manual must stay with the
machine in case of transfer, sale, hire, granting of use or
leasing.
C.6
Recipients of the manual
This manual is intended for:
• the carrier and handling personnel;
• installation and commissioning personnel;
• the employer of machine users and the workplace
manager;
• operators for normal machine use;
• specialised personnel - Customer Care service (see service
manual).
C.7
Definitions
Listed below are the definitions of the main terms used in the
manual. It is advisable to read them carefully before use.
Operator
machine installation, adjustment, use,
maintenance, cleaning, repair and trans-
port personnel.
Manufacturer
Electrolux Professional SpA or any other
service centre authorised by Electrolux
Professional SpA.
Operator for
an operator who has been informed and
normal
trained regarding the tasks and hazards
machine use
involved in normal machine use.
Power
Nominal max.
supply
Power
cable
section
kW
mm²
4,1 - 4,5
1.5
8,2 - 9
2.5
1
Advertisement
Table of Contents
