Solar Thermal System (For Hydrosplit) - LG THERMA V Installation Manual

Solar Thermal System (For Hydrosplit)

This product can be used by connecting the Solar Thermal System in the field. It can be utilized
hot water heated by solar thermal system.
How to Install Solar Thermal System
[Parts of Solar Thermal Kit]
Follow below procedures step 1 ~ step 4.
Step 1. Install tube connector(it is necessary to reduce or extend diameter of pipe.) the pipe and
solar thermal kit.
Step 2. Check if the power of the unit is turned off.
Step 3. Disassemble front panels and distinguish control box(Indoor) of the unit.
Step 4. Insert harness into PCB(Solar) fully and fix the thermal sensor into tube connector as
shown below.
h If the DHW tank sensor is connected, disconnect the sensor from PCB first.
h Solar Thermal Sensor : PT1000 (Field Supply)
Indoor PCB
Solar Thermal Sensor
(less than 12 m)
Water Tank Sensor
(less than 12 m)
Water In
Water Out
Solar
Solar thermal sensor
(Field Supply)
3way valve
(Field Supply)
Tube
connecter
(Field Supply)
Pump
(Field Supply)
Water Tank
ACCESSORIES INSTALLATION
Water Pipe
Tube connector
Solar
Water In
Thermal
System
Water Out
(Field Supply)
117
Solar
Collector
(Field Supply)