The Door Will Not Open - Miele WTD 160 Operating Instructions Manual

Hide thumbs Also See for WTD 160:
Table of Contents

Advertisement

The door will not open

Problem
The door cannot be
opened during a pro-
gramme sequence.
The door cannot be
opened at the end of
the programme or after
a programme cancella-
tion. Flashing bars
......... are
shown on the time dis-
play.
The door will not un-
lock.  and  alternate
on the time display.
Cause and remedy
The door is locked during a programme sequence.
 Follow the instructions in "Changing the pro-
gramme sequence – Adding laundry".
There is still water in the drum and the washer-dryer
is unable to drain.
 Clean the drain filter and the drain pump as de-
scribed in "Opening the door in the event of a
blocked drain outlet and/or power cut".
The water level in the drum is too high.
 Cancel the programme. The washer-dryer will
pump the water away.
The door cannot be opened for safety reasons. The
temperature in the drum exceeds 55 °C during wash-
ing or 70 °C during drying.
 Wait until the temperature in the drum has de-
creased and the door will be unlocked.
The door lock has jammed.
 Call the Miele Customer Service Department.
Problem solving guide
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents