How The Control Field Works; Applications - Miele WTD 160 Operating Instructions Manual

i Start/Add laundry sensor control
– The programme can be started as
soon as the sensor control is
flashing on and off. Touching the
Start/Add laundry sensor control
starts the selected programme.
The sensor control lights up con-
stantly.
– Once the programme has been
started, the Start/Add laundry
sensor control allows you to add
laundry.
j Optical interface
This is used by the Customer Ser-
vice Department as a transmission
point.
k Delay start sensor control  with
arrow buttons  and 
With the delay start function, you
can delay the start of the pro-
gramme.
Please see "Delay start/SmartStart"
for more information.
l Programme selector
for selecting programmes and for
switching off the appliance. The
washer-dryer is switched on by se-
lecting a programme. You can switch
the washer-dryer off by turning the
programme selector to the  posi-
tion.
Operating the washer-dryer

How the control field works

The sensor controls react to fingertip
contact. If a sensor control is illumin-
ated, it can be selected.
If a sensor control is brightly lit, this
means it is currently selected
If a sensor control is dimly lit, this
means it can be selected

Applications

You can use this washer-dryer to:
- Wash separately
Maximum load (depending on pro-
gramme) 8.0 kg
- Dry separately
Maximum load (depending on pro-
gramme) 5.0 kg
or
- Wash and dry in a continuous se-
quence
Maximum load (depending on pro-
gramme) 5.0 kg
15