Keypad Tone; Pin Code; Control Field Switch-Off Behaviour - Miele WTD 160 Operating Instructions Manual

 Keypad tone
The tone that sounds when a sensor
control is pressed can be switched on
or off.
Options
 = Off
 = On (factory default)
 PIN code
The PIN code prevents your washer-
dryer being used without your know-
ledge.
When the PIN code has been activated,
you have to enter the code after switch-
ing the washer-dryer on. Otherwise the
washer-dryer cannot be operated.
Options
 = Off (factory default)
 = On
If the  option has been selected, you
will have to enter the PIN code before
you can operate the washer-dryer.
Using the washer-dryer when the PIN
code is activated
The code is 125 and cannot be altered.
 Switch the washer-dryer on.
   appears on the time display and
the  and  sensor controls light up.
 Touch the  sensor control.
   appears on the time display.
 Confirm the number with the Start/
Add laundry sensor control.
The first number has been saved.
Programmable functions
 Enter the second and third numbers
using the  and  sensor controls
and confirm the numbers with the
Start/Add laundry sensor control.
The lock function is deactivated.
 Control field switch-off be-
haviour
To save energy the time display and
sensor controls will go out after
10 minutes, and only the Start/Stop
sensor control will flash slowly.
Options
 = Off
The time display and sensor
controls will remain lit up while
the washer-dryer is switched
on.

= On (factory default)
The time display and sensor
controls will switch off
10 minutes after the pro-
gramme has started.
However, the time display and
sensor controls will remain lit
up for 10 minutes after a delay
start period has elapsed, after
the end of a programme or at
the end of the anti-crease
phase.
87