The Drum Door Cannot Be Opened By Pressing The Door Button - Miele WT 2780 WPM Operating Instructions Manual

Hide thumbs Also See for WT 2780 WPM:
Table of Contents

Advertisement

Problem solving guide

The drum door cannot be opened by pressing the Door button

Problem
The machine is not
connected to the
electricity supply and / or
is not switched on.
The safety lock has been
activated.
Access via a code has
been activated.
Power cut.
The door was not
correctly engaged.
There is still water in the
drum and the machine is
unable to drain.
The door cannot be
opened during or after
drying.
For safety reasons, the drum door cannot be opened if the suds temperature is
higher than 55°C.
62
Insert the plug in the socket and switch on and / or
switch the machine on with the K button.
Deactivate the safety lock as described in
"Changing the programme sequence - Safety lock".
Deactivate the code as described in the Settings
menu.
Open the drum door as described in the next
section.
Press hard against the lock side of the drum door
and then press the Door button.
Clean the drain filter and drain pump as described
in the next section.
For safety reasons the drum door cannot be
opened if the temperature is higher than 70°C.
– Wait until the temperature is less than 70°C.
– Deactivate the Extended cool-down time as
described in the Settings menu.
Remedy

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents