Selecting A Programme - Miele WTD 160 Operating Instructions Manual

3. Selecting a programme

Switching the washer-dryer on
 Turn the programme selector to a
programme.
The control field lights up.
Selecting a programme
 Turn the programme selector to the
required programme.
The estimated wash time is shown on
the time display and the pre-set tem-
perature and spin speed light up in the
control field.
- Using the MobileStart programme
selector position
 Turn the programme selector to the
MobileStart  position.
Tip: In order to use MobileStart , the
washer-dryer must be logged on to the
WiFi network and Remote control must
be switched on.
Once the programme has started, the
washer-dryer can be operated with the
Miele@mobile app.
Selecting washing
 Touch the Washing or Drying sensor
control until just the Washing sensor
control is brightly lit up.
The Drying sensor control must only
light up dimly as otherwise the wash
programme would be followed im-
mediately by the relevant drying pro-
gramme.
WASHING
23