What to do if ...
The door will not open
Problem
The door will not open
during a programme.
At the end of the pro-
gramme or after a pro-
gramme cancellation:
or
Cooling down
Comfort
cooling
appears in the
display.
The following appears
in the display:
Service Door release
88
Cause and remedy
The door is locked during a programme.
Press the Start/Stop button.
Select
Cancel programme
or sensors.
The door will unlock and you will be able to pull it
open.
There is still water in the drum and the washer-dryer
is unable to drain.
Clean the drain filters and the drain pumps as de-
scribed in "Opening the door in the event of a
blocked drain outlet and/or power failure".
The water level in the drum is too high.
Cancel the programme. The water will be pumped
away.
For safety reasons the door cannot be opened if the
temperature in the drum exceeds 55 °C during wash-
ing or 70 °C during drying.
Wait until the temperature in the drum has de-
creased and the message has gone out in the dis-
play.
The door lock has jammed.
Call Service.
or
with the
Add laundry