Appliance Description; Display; Sensitive Touch; Using The Hob - Proline VH6000T Instructions Manual

APPLIANCE DESCRIPTION

Display

Display
0
1...9
E
H
A
L

Sensitive touch

Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
touches the key, the corresponding command is activated. This activation is validated by a
control light, a letter or a number in the display and/or a "beep" sound.
For normal use, press only one key at a time.

USING THE HOB

Before first use

Clean your hob with a damp cloth, and then dry the surface thoroughly. To avoid damaging the
hob surface, use only detergents specific for cleaning ceramic glass.

Starting-up

You should first switch on the hob, and then the desired heating zone.
•
Swich on/off the hob:
Control panel action
Press the key for a few seconds to switch on the hob.
Press the key for a few seconds to switch off the hob.
•
Start-up/ switch off a heating zone:
Control panel action
Once the hob has been switched on, press the selection key to
select the heating zone.
Press [ + ] to increase power.
Press [ - ] to decrease power.
Press [ - ] for a few seconds to stop the heating zone.
If no setting has been made within 20 seconds after switching on the hob, it turns off
automatically.
Designation
Zero
Power level
Error message
Residual heat
Automated cooking device The boosted power is activated.
Locking
Function
The heating zone is activated.
Selection of the cooking level.
Electronic failure.
The heating zone is hot.
Control panel locking.
25
Signal
4 x [ 0 ]
Nothing or [ H ]
Signal
Display on
[ 1 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]