Requirements - ATCOM Gateway AU-600 User Manual

USB Gateway

Requirements

In order to install the USB Gateway you will need the following:
1. USB Gateway
2. USB cable
3. RJ11 cable
4. Telephone (regular telephone, cordless phone, DECT phone, ...)
5. Telephone service (for conf call, 3 way calling and forwarding features)
6. Broadband internet service is recommended
7. PC with the following minimum specifications:
o Pentium 400MHz or equivalent
o Windows 2000 or XP
o Available USB port (1.0, 1.1 or 2.0)
o Skype™ version 1.1.079 or higher (www.skype.com) must be installed
o 128MB RAM
o 10MB available hard disk space
o CD-ROM drive to install VoIP Agent from the supplied CD-ROM
Note that the USB Gateway must be connected directly to the PC USB port or to an
AC Powered USB hub. It CANNOT be installed on a bus powered USB hub.
Page 5 of 48