Call Forwarding Is Not Working Properly; Usb Port Power Surge - ATCOM Gateway AU-600 User Manual

USB Gateway
Check the Audio In and Audio Out list boxes and make sure VoIP Virtual Audio device
is selected.

Call Forwarding is not working properly

• Make sure that a telephone cable is plugged into the USB Gateway line jack and
to the wall phone plug
• Try to dial the telephone number as you have entered in the USB Gateway Call
Forwarding dialog box
• If you are on a PBX, make sure you have entered enough commas after the 9 (for
example) to make sure that USB Gateway waits for the dialtone before dialing the
telephone number

USB port power surge

If your connect USB Gateway to USB port with low power supply, your PC will warn
the USB port power surge problem. In this case you can try:
• USE AC power supply instead of battery power supply in your laptop.
• Connect USB Gateway to another USB port.
• Remove other USB power hardware.
• USE USB hub with its auxiliary power supply
Page 45 of 48