Table of Contents
Advertisement
USB Gateway
USB GATEWAY States
When the USB Gateway is installed and the software is installed properly, then you will
see a green phone in the system tray as shown below.
If the VoIP agent is running and the USB Gateway is removed or Skype is not running,
then the telephone will be red as shown below.
During an incoming or outgoing Skype call, the telephone handset will jiggle as shown
below, indicating an VoIP call is being initiated.
When the VoIP agent is not running, there is no phone in the system tray.
USB Gateway LEDs
The USB Gateway typically has 3 LEDs as illustrated below. Note that the colors or
number of LEDs on your USB Gateway may be different.
POWER PSTN
• When the USB Gateway is installed and the software is installed properly, then
the power LED will be lit red indicating the USB Gateway is receiving power.
• The PSTN LED indicates a PSTN call
• The VoIP LED indicates a VoIP call
VoIP
Page 20 of 48
Advertisement
Table of Contents
Need help?
Do you have a question about the Gateway AU-600 and is the answer not in the manual?