Table of Contents
Advertisement
USB Gateway
Forward PSTN call to Skype
In order to enable toll bypass of incoming PSTN calls, change the
settings as follows:
• Check the Enable administrative mode.
• Set your password and press apply as shown below
When you call your telephone line from mobile, and then press *. Then the IVR will
guide you to implement the forward function.
For example
: you want to forward your call to your skype friend (you set his speed dial
number to 77). You have select the "answering machine" and "Enable administrative
mode" and set the "pin number" with "1234", then you use your mobile to call the
landline connect to the USB phone gateway, press * when you hear the answering
machine voice. Then the call will go to the IVR menu, then press the pin number and the
forward number according to the IVR. Details about the IVR flow please see the
Appendix A
Set administrative password
Incoming PSTN Calls
Enable administrative mode
Page 33 of 48
Advertisement
Table of Contents
Need help?
Do you have a question about the Gateway AU-600 and is the answer not in the manual?