ATCOM Gateway AU-600 User Manual page 30

USB Gateway
Press the Call Handling tab to see the Call Forward parameters as shown below.
Select ring times before forward
In order to forward incoming Skype™ calls to a telephone number such as your mobile
phone, change the Incoming Internet Calls
• Select the Call Forward as shown above
• Select the number of rings before the forwarding takes place.
• Then key in the telephone that should be dialed on the telephone line and press
the Apply and/or Quit button. Enter the telephone exactly as you would dial it if
you were to pick up a telephone directly connected to the phone line.
you are on a PBX, you may need to press a digit to get an outside line (i.e. 9). In
this case you would enter
In order to forward incoming regular calls to a VoIP call, such as through SkypeOut™ or
to a Skype account, enter speed dial number (e.g. 77) associated with the Skype User
without the * key (as shown above).or enter the SkypeOut™ number (e.g.
0016175551212). Change the
• Select the Call Forward option as shown above
• Select the number of rings before the forwarding takes place as shown below.
• Then key in the skype speed dial number or SkypeOut number that should be
dialed and press the Apply and/or Quit button as shown below.
Enable Call forward and
set the PSTN number
settings as follows:
9,,,16175551212.)
Incoming PSTN Calls
Enable Call forward and
set the Skype number
Select ring times before forward
as below:
(Note: If
Page 30 of 48