Changing The Default Settings - ATCOM Gateway AU-600 User Manual

USB Gateway

Changing the Default Settings

You can change the default settings for sending a call, activating a Skype™ call,
switching between a Skype™ call and a regular call (call waiting) and conference calling,
by running the USB Gateway configuration.
Right click on the VoIP agent and select Configure as shown below.
You will see the configuration tab as shown below.
The Initiate Voip Call – press these keys to get a VoIP dial-tone. You can now dial a
SkypeOut™ call or a Skype™ speed dial call from your telephone handset.
The Send Key – press this key following the phone number (or speed dial number) when
making a VoIP call.
The Call Waiting Sequence – press these keys during a call to switch between a VoIP
and regular call. For example to switch from a regular telephone call to an incoming
Skype™ call or to switch from a Skype™ call to an incoming regular phone call.
Page 37 of 48