Table of Contents
Advertisement
Quick Links
AG-110 SIP Gateway User Manual
AG-110 SIP Gateway User Manual
1．AG-110 SIP Gateway Features ...................................................................................3
1.1
Product Appearance ............................................................................................ 3
1.2
Backside Illustration ........................................................................................... 4
1.3
Software .............................................................................................................. 4
1.4
Protocol and standard.......................................................................................... 4
1.5
Interface features................................................................................................. 5
1.6 Electric requirements.............................................................................................. 5
1.7 Operating requirement............................................................................................ 5
1.8 Certificate: .............................................................................................................. 5
1.9
Packaging............................................................................................................ 5
1.10
Installations .......................................................................................................... 5
2.1
Home................................................................................................................... 7
2.2
LAN .................................................................................................................... 8
2.2.1
LAN status ....................................................................................................................... 8
2.2.2
LAN settings .................................................................................................................... 9
2.2.3
PPPoE setting.................................................................................................................. 9
2.3
SIP..................................................................................................................... 11
2.3.1
SIP server Configuration .............................................................................................. 11
2.3.2
Extensions ..................................................................................................................... 12
2.3.3
User1 Configuration(User2 is the same as User1) ....................................................... 13
2.3.4
OOB Signalling ............................................................................................................. 15
2.3.5
ToS/DiffServ .................................................................................................................. 16
2.3.6
Tone ............................................................................................................................... 17
2.3.7
Ring ............................................................................................................................... 18
2.3.8
Service Code ................................................................................................................. 19
2.4
CODECS........................................................................................................... 20
2.5
System............................................................................................................... 21
2.5.1
Security,Timeout............................................................................................................ 21
2.5.2
Localization................................................................................................................... 22
2.5.3
Handset ......................................................................................................................... 23
2.5.4
SNMP Configuration..................................................................................................... 24
2.6
Download.......................................................................................................... 25
Page 1 of 37
Advertisement
Table of Contents
Related Manuals for ATCOM AG-110
Summary of Contents for ATCOM AG-110
-
Page 1: Table Of Contents
AG-110 SIP Gateway User Manual AG-110 SIP Gateway User Manual 1．AG-110 SIP Gateway Features ...................3 Product Appearance .................... 3 Backside Illustration ................... 4 Software ......................4 Protocol and standard..................4 Interface features....................5 1.6 Electric requirements....................5 1.7 Operating requirement.................... 5 1.8 Certificate: ...................... - Page 2 How to configure AG-110?................33 How to change AG-110 LAN port MAC address? ........... 33 Why does my AG-110 always drop off from the server? ......... 34 How to use the speed dial function? ..............34 Page 2 of 37...
-
Page 3: 1．Ag-110 Sip Gateway Features
AG-110 SIP Gateway User Manual 1． AG-110 SIP Gateway Features Product Appearance TEL: telephone status, the light is led ,when pick up the phone the light WAN: WAN port status ,when the network is ok the light will flash SYS: Not registered in sip sever ,the light off , Registration lamp blinks registered, light off PWR: power status led. -
Page 4: Backside Illustration
AG-110 SIP Gateway User Manual Backside Illustration TEL: telephone interface WAN: 10M/100M auto-negotiation, factory default is set to DHCP. POWER: Power Jack, 9~12V,800mA Reset: Please refer to “ ” for the usage of this restore_to_factory_default button Software Configured by HTTP web browser Support HTTP, TFTP upgrade. -
Page 5: Interface Features
1.10 Installations Connect the AG-110 LAN port and you computer with the RJ45 cable, and then change your computer IP to static 192.168.1.xxx or use dynamic obtain IP, type 192.168.1.1 in your IE browser to access AG-110 and change its setting. - Page 6 AG-110 SIP Gateway User Manual Page 6 of 37...
-
Page 7: 2．Settings
AG-110 SIP Gateway User Manual 2． Settings Home System uptime: system running time NTP time: NTP time and date LAN IP Address: Gateway IP, factory default is192.168.1.1 MAC Address: Gateway MAC address，the same as LAN port MAC address Serial Number:... -
Page 8: Lan
AG-110 SIP Gateway User Manual 2.2.1 LAN status Interface Status： 1. Enable: Yes indicate LAN id ready for use 2. Protocol： Ethernet 3. Interface status: UP or Down 4. Link Status: link speed mode Network Settings： IP address: LAN port IP address,factory default is 192.168.0.1... -
Page 9: Lan Settings
AG-110 SIP Gateway User Manual 2.2.2 LAN settings 1、Use DHCP to obtain LAN configuration:use DHCP to obtain ip address for Ethernet 2、Specify fixed LAN configuration: fix ip address IP Address: ip address of ethernet Subnet Mask: mask IP Gateway: gateway 3、Automatically obtain DNS server settings: Auto obtain DNS... - Page 10 AG-110 SIP Gateway User Manual Enable PPPoE: use PPPoE to connect to the internet Username&Password: PPP id and PPP pin from your ISP Echo Timeout: The duration between PPP echo requests sending to server. Echo Count: The number of unanswered PPP echo requests before PPP connection is closed.
-
Page 11: Sip
6. Send Registration Request with Expire Time： Register TTL (unit: seconds). Indicate the register period, if AG-110 always log off after some time，please set this time to a lower value. 7. Outbound Proxy IP: Outbound Proxy server IP address 8. -
Page 12: Extensions
AG-110 SIP Gateway User Manual 3. To enable # to be recognized as dial number: use # as a dial number 4. * use as a quick dial function: the number will send immediately after you press the * button 5. -
Page 13: User1 Configuration(User2 Is The Same As User1)
AG-110 SIP Gateway User Manual transfer for unattended and attended call transfer. 2.3.3 User1 Configuration(User2 is the same as User1) Primary Server，Secondary Server Phone Number: phone number. CallerID Name: caller ID Port Name: Local register port. (Note: please assign different port to different user) User Name: user name. - Page 14 AG-110 SIP Gateway User Manual Password: password. Line1 AEC Control: enable AEC (Acoustic Echo Cancellation) function, if the other hear a significant echo, please check this option. Line1 Gain Control: Input Gain Control (-12 ~ 18) db: input volume control.
-
Page 15: Oob Signalling
AG-110 SIP Gateway User Manual 2.3.4 OOB Signalling This sub-page allows configuration of the out-of-band signaling options for SIP. Select whether OOB telephone event signaling is to be done using the SIP INFO message, or to be done via RFC2833 RTP signaling. For additional information please refer RFC2833. -
Page 16: Tos/Diffserv
AG-110 SIP Gateway User Manual 2.3.5 ToS/DiffServ This sub-page is used to configure the Type-of-Service/Diffserv byte values which are to be used in the IP header of all transmitted SIP signaling packets and RTP packets. The ToS/DiffServ byte values are entered as two-digit hexadecimal values. -
Page 17: Tone
AG-110 SIP Gateway User Manual 2.3.6 Tone Set AG-110 ring tone for different region. Page 17 of 37... -
Page 18: Ring
AG-110 SIP Gateway User Manual 2.3.7 Ring Set different user’s ring tone, co-work with “SIP User Distinctive Ring Settings” Page 18 of 37... -
Page 19: Service Code
AG-110 SIP Gateway User Manual 2.3.8 Service Code Please refer to value_add_service for the use of service code. Page 19 of 37... -
Page 20: Codecs
AG-110 SIP Gateway User Manual CODECS CODECS: Support CODEC: G711U、G711A、G723、G726、G729。 Silence Suppression: enable VAD. Packetization: Configure the packet sending increments Jitter Buffer configure the timing of the voice buffering. Selection between adaptive or fixed jitter buffer. Default = ADAPTIVE Set the adaptive jitter buffer maximum playout delay. Default = 100ms or Fixed jitter buffer playout delay. -
Page 21: System
AG-110 SIP Gateway User Manual System 2.5.1 Security,Timeout Setting web security and authentication timeout Page 21 of 37... -
Page 22: Localization
AG-110 SIP Gateway User Manual 2.5.2 Localization Choose the correct country for a proper impedance match, as well as the NTP Server, and Time Zone. Check the “Adjust clock for daylight savings”, when applicable. Click on “Save Localization Settings”, to save your configurations. -
Page 23: Handset
AG-110 SIP Gateway User Manual 2.5.3 Handset Hook Flash timing setting Hook Flash Timer Min: minimum available time，unit: ms。 Hook Flash Timer Max: maximum available time，unit: ms。 When you press the flash during the time range you set, your action will act as hold function, and otherwise it will act as the hang up function. -
Page 24: Snmp Configuration
AG-110 SIP Gateway User Manual 2.5.4 SNMP Configuration SNMP Trap Configuration IP address: Trap host IP address Trap Community: The community name used by the SNMP manager to verify traps. The default value is ‘public’ SNMP Community Configuration Read Community: The community name used by the SNMP manager when reading SNMP data items from a client MIB. -
Page 25: Download
AG-110 SIP Gateway User Manual Download 2.6.1 Download For both HTTP and TFTP methods, the device will reboot itself into the downloader mode if the main application is executing, and proceed with the ROM file download and permanent write of the application to the device’s flash memory. -
Page 26: Configuration
AG-110 SIP Gateway User Manual Configuration 2.7.1 Backup and restore settings Back up and restore the configure files. -
Page 27: Reset
AG-110 SIP Gateway User Manual Reset AG-110 will save the current settings and reset by clicking the “reset” button... -
Page 28: 3．Restore To Factory Default
AG-110 SIP Gateway User Manual 3． Restore to factory default If your AG-110 settings is in chaos or you can’t get the AG-110 IP to access it, you can reset the device to factory default: a) Power off b) Press reset button and power on... -
Page 29: 4．Faq
User: user name: user password: voip How to use the IVR function of AG-110? A2： The IVR function is record in G729 codec, so you have to choose G729 codec to active the IVR. You can use IVR function to observe and set the WAN port network parameters pick up the handset and dial **** to enter IVR mode。... -
Page 30: Q3 How Can I Know The Ip Address Of Ag-110
Set your computer to dynamic obtain IP， iii. Use command “ipconfig” to view your computer network status, and the gateway IP is the AG-110 LAN port IP. It is 192.168.1.1 in this case. Then you can use this IP address to access AG-110 through its LAN... -
Page 31: Q4 How To Update Ag-110 Firmware
AG-110 SIP Gateway User Manual How to update AG-110 firmware? A4： Go to Download Download, press “browse” in the http download method，and choose the correct firmware file (a 1.5M file in .r0 extension),and press the “Start HTTP Download” to perform updating。... -
Page 32: Q6 How To Use The Value Add Service Of Ag-110
(0T|00T|[3-5]xxx|8xxxxxxx|*xx|91xxxxxxxxxx|9011x.T) How to use the value add service of AG-110? You need to set the service code for using the AG-110 value add service. For example, I set the service code as the above picture。 Condition Call Forwarding: (the call will transfer if no one answer) -
Page 33: Q7 How To Configure Ag-110
C will leave the call is B push the hook-flash again. How to configure AG-110? please refer to “AG-110 quick start guide” How to change AG-110 LAN port MAC address? please access http://AG-110ip/burn.htm and change the MAC address,... -
Page 34: Q9 Why Does My Ag-110 Always Drop Off From The Server
Send Registration Request with Expire Time”, if this time is longer then the system require register time, AG-110 will always drop off from the server, please set this time to a suitable value, (unit: seconds). How to use the speed dial function? You need to set the speed dial number in the “SIP User...
Need help?
Do you have a question about the AG-110 and is the answer not in the manual?
Questions and answers