Advertisement
2. Line in mode
After powering the unit on, connect an external audio source to the LINE IN jack of the
soundbar by using a 3.5mm audio cable, then short press the Power/Source button on the
soundbar or the Mode/Mute button on the remote control to switch to "LINE IN". Adjust the
external audio source to a moderate volume and begin playback.
3. AUX in mode
After powering the unit on, connect an external audio source to the AUX IN jack of the
soundbar by using the included RCA cable, then short press the Power/Source button on
the soundbar or the Mode/Mute button on the remote control to switch to "AUX IN". Adjust
the external audio source to a moderate volume and begin playback.
4. HDMI mode
Short press the Power/Source button on the soundbar or the Mode/Mute button on the
remote control to switch to "HDMI" mode. Connect a HDMI cable to the HDMI (ARC) port
on your TV and then to the HDMI IN (ARC) port on the rear of the soundbar. Ensure the
HDMI ARC function is activated on your TV and digital output is set to PCM/Dolby.
5. Optical mode
Short press the Power/Source button on the soundbar or the Mode/Mute button on the
remote control to switch to "OPTICAL". Connect the DVD audio and equipment to the
soundbar's OPT IN jack with an optical audio cable. This machine decodes optical fiber
digital to restore sound through power amplifier. Ensure your TV's digital output is set to
PCM/Dolby.
6. USB mode
After powering the soundbar on, insert a USB drive into the USB port of the soundbar. The
product will automatically enter USB playback mode and plays any supported audio files
found on the USB. Press the Play/Pause button to play and pause the music. Short press
the Previous or Next button to skip back/forward between songs.
Advertisement
