Locking And Unlocking The Sensor; Discrete Output Menu - Banner L-GAGE LTF Instruction Manual

Table 1: Remote TEACH Window Sizes
Remote TEACH Window Size (mm)
Variable
LTF12
X1 10
X2
20
X3
100

3.4 Locking and Unlocking the Sensor

Use the lock and unlock feature to prevent unauthorized or accidental programming changes. A lock symbol
the upper left corner of the display to indicate when the sensor is locked. When locked, the menus are available to view
settings, but the values cannot be changed. The remote input is also disabled, except for the unlock function.
Button Instructions
To lock or unlock the sensor using the buttons, press and hold Down
Remote Input Instructions
1. Access the setup mode.
Action
Double-pulse the remote input.
2. Access the lock/unlock function.
Action
Four-pulse the remote input.
3. Lock or unlock the sensor.
Action
Unlock : Single-pulse the remote line.
Lock: Double-pulse the remote input.

3.5 Discrete Output Menu

Use this menu to view or change
• Setpoints
• Midpoint
• Mode
• Timers
• Polarity
L-GAGE
Variable
LTF24
10
20
100
T
T
T T
T
T
T
T
www.bannerengineering.com - Tel: + 1 888 373 6767
®
LTF Time of Flight Laser Distance Sensor with IO-Link
Remote TEACH Window Size (mm)
LTF12
X4 500
X5
2000
X6
11950
and Escape simultaneously for 3 seconds.
Result
T
"REMOTE SETUP" displays.
Result
T T
"LOCK" and the current status (unlocked or
locked) display.
T T
Result
"Unlocked" flashes and the sensor returns
to Run mode. The sensor is unlocked.
"Locked" flashes and the sensor returns to
T
Run mode. The sensor is locked and the
lock symbol displays in the upper left
corner.
LTF24
500
2000
23950
displays in
11