Glossary Of Symbols - ETEKCITY TMB-1583-BS User Manual

Safety Information (Cont.)
• Wireless communications equipment such as
wireless home network devices, mobile phones,
cordless telephones and their base stations,
and walkie-talkies can affect this monitor and
should be kept at least a distance "d" away from
the equipment. Distance "d" is calculated by the
MANUFACTURER from the 80MHz to 5.8GHz
column of Table 4 and Table 9 of IEC 60601-1-
2:2014, as appropriate.
• Only use ACCESSORIES and detachable parts
specified/authorized by the MANUFACTURER.
Using other parts or accessories may cause
damage to the monitor or danger to the users/
patients.
• There are no luer lock connectors used in the
construction of tubing. If there were, there is
a possibility that they might be inadvertently
connected to intravascular fluid systems,
allowing air to be pumped into a blood vessel.
12
• Please use the monitor in the environment
which is provided in the user manual. Otherwise,
the performance and lifetime of the monitor will
be impacted and reduced.
SAVE THESE
INSTRUCTIONS

Glossary of Symbols

These symbols might be in the user manual,
labelling, or other components.
Symbol for "THE OPERATION GUIDE MUST
BE READ"
Symbol for "MANUFACTURER"
The B/N (Batch Number) code combines
B/N
the destination country, PO number, date of
manufacture, and serial number.
Symbol for "DIRECT CURRENT"
Symbol for "MANUFACTURE DATE"
T1A/250V Φ3.6*10CCC
F1
The degree of protection from water or
IP21
particulate matter. Ingress Protection 21:
Protected from touch by fingers and objects
greater than 12 millimeters. Protected from
condensation.
Symbol for "TYPE BF APPLIED PARTS"
Symbol for "ENVIRONMENT PROTECTION" -
Electrical waste products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authority or
retailer for recycling advice.
Symbol for "Class II Equipment"
For indoor use only
Caution: These notes must be followed to
prevent any damage to the device.
13