Table of Contents
Advertisement
Using the Blood Pressure Monitor (Cont.)
Measuring Blood Pressure
1.
When the monitor is off, press
. This will
turn on the monitor and it will automatically
begin measuring.
2.
Relax and avoid moving or talking while
measuring. When the measuring is finished,
the results will display.
3.
The monitor will automatically transmit your
results to the VeSync app. The Bluetooth symbol
will blink on the display while this is happening.
Note: If data transmission fails, the display
will show "!". This will disappear when data
transmission succeeds.
4.
Wait 3 minutes before taking a second
measurement, if necessary. This allows your
blood circulation to recover.
32
Note:
• Press
at any time to stop measuring.
• If the cuff causes any increased discomfort,
immediately press
to turn off the
monitor.
• After taking a measurement and seeing the
reading, press
to turn off the monitor.
If you do not, it will turn off automatically
after 2 minutes of inactivity. You can
change this time setting in the VeSync app.
• Do not pull on the air hose to disconnect
from the air port. Only use the air plug to
connect or disconnect the arm cuff.
Using the Blood Pressure Monitor (Cont.)
Measurement Tips
Measurements may be inaccurate if taken in the
following circumstances:
• Within 1 hour after eating or drinking
• Immediately after tea, coffee, or smoking
• Within 20 minutes of taking a bath
• When talking or moving your fingers
• In a very cold environment
• When you need to urinate
33
Hide quick links:
Advertisement
Table of Contents
