Glossary Of Symbols - ETEKCITY TMB-1583-BS User Manual

Glossary of Symbols

These symbols might be in the user manual,
labelling, or other components.
Symbol for "THE OPERATION GUIDE MUST
BE READ"
Symbol for "MANUFACTURER"
The B/N (Batch Number) code combines
B/N
the destination country, PO number, date of
manufacture, and serial number.
Symbol for "DIRECT CURRENT"
Date and Country of manufacture
Symbol for "Recycle"
It means the device could be protected against
IP21
solid foreign objects of 12,5mm Ф and greater, and
against vertically falling water drops.
Symbol for "TYPE BF APPLIED PARTS"
Symbol for "ENVIRONMENT PROTECTION" -
Electrical waste products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authority or
retailer for recycling advice.
Symbol for "Class II Equipment"
For indoor use only
Caution
Indicates that caution is necessary when operating
the device or control close to where the symbol is
placed, or that the current situation needs operator
awareness or operator action in order to avoid
undesirable consequences.
MR Unsafe
This device is not intended to operate in Magnetic
Resonance environment. Do not take the device
into MR environments
13