Nokia FastMile 4G Installation Manual page 104

Mounting and connecting the Nokia FastMile 4G
Receiver
98
LED color LED priority
Green Third priority
(2 of 2)
Table 7 Status LED behavior for a Nokia FastMile 4G Receiver remotely
managed from an ACS
LED color LED priority
Blue First priority
Green Second priority
19 If you installed a Compact multi-band model of the Nokia FastMile 4G Receiver, you can
check the signal strength LEDs on the Nokia FastMile 4G Receiver by pressing the
measurement button on the side of the unit. Figure
measurement button.
3TG-00387-ABBA-TCZZA
Nokia FastMile 4G Receiver Installation Guide
LED behavior
Blinking twice per second
Blinking one per second
Solid
Off
LED behavior
Blinking
Solid
Off
Blinking twice per second
Blinking one per second
Solid
Off
58 shows the location of the
Status information
Kernel and application start up
Application start up
Start up
OAM link is established
Status information
Bluetooth connection in progress
Bluetooth connection established
No Bluetooth connection
Kernel and application start up
Application start up
Start up
Software is stable
Issue: 01