Identifying Package Contents; Package Contents For The Nokia Fastmile 4G Receiver - Nokia FastMile 4G Installation Manual

Nokia FastMile 4G Receiver Installation Guide

7 Identifying package contents

7.1 Package contents for the Nokia FastMile 4G
Issue: 01

7.1 Package contents for the Nokia FastMile 4G Receiver

Receiver
The shipping package for the Nokia FastMile 4G Receiver contains the following:
•
Nokia FastMile 4G Receiver
•
QR code on a sheet of paper:
•
the QR code has system-use information for the Nokia FastMile 4G Receiver
•
you use a mobile phone that has the Nokia Wireless app to scan the QR code to log
in to the Nokia FastMile 4G Receiver (log in is done through Bluetooth over a VPN
connection)
•
bracket kit consisting of:
•
mounting plate
•
receiver bracket (shipped attached to the mounting plate with three fasteners)
•
two fasteners for attaching the mounting plate to the Nokia FastMile 4G Receiver
•
SIM card tool for safe insertion or extraction of SIM card; the tool is sometimes
referred to as a "nipple"
If you will be installing a Compact multi-band model of the Nokia FastMile 4G
Receiver, you will need to provide a cat5e shielded Ethernet cable that has standard
pinouts and is a maximum of 80 m (262 ft) in length; the same cable is also used for
power (PoE as per IEEE802.3 at type-2). The cable will need a male RJ 45 connector
to attach the cable to the Nokia FastMile 4G Receiver.
If you will be mounting the Nokia FastMile 4G Receiver on a pole, you will need kit
3TG-00291-AA that contains the pole adapter for the Nokia FastMile 4G Receiver.
3TG-00387-ABBA-TCZZA
Identifying package contents
35