Advertisement
This guide describes how to get started with raw ADC data capture from the xWR mmWave sensor EVMs.
1
1
2
Data and Supply Cable Connections
3
Configure Static IP Address on the PC
....................................................................................................................
4
5
6
SPRUIK7 - May 2018
Submit Documentation Feedback
DCA1000EVM Quick Start Guide
...............................................................................................................
.....................................................................................
...................................................................................
...............................................................................................
Copyright © 2018, Texas Instruments Incorporated
Contents
List of Figures
...............................................
...........................................................................
Quick Start Guide
SPRUIK7 - May 2018
DCA1000EVM Quick Start Guide
2
2
2
3
3
4
5
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Texas Instruments DCA1000EVM
Summary of Contents for Texas Instruments DCA1000EVM
- Page 1 Configure Static IP Address on the PC ........................COM Ports ....................Capture and Post ADC Data ................Visualization of the Captured Raw ADC Data SPRUIK7 – May 2018 DCA1000EVM Quick Start Guide Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
- Page 2 2. Connect the microUSB and Ethernet cables to the PC interface, as shown in Figure 2. The DCA1000 and the xWR EVM are powered with 5-V, 2.5-A supplies. Figure 2. Data and Supply Cable Connections DCA1000EVM Quick Start Guide SPRUIK7 – May 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
- Page 3 6. The device manager shows the COM ports, as shown in Figure 4. The RS232 COM port is shown as XDS110 Class Application/User UART. Figure 4. COM Ports SPRUIK7 – May 2018 DCA1000EVM Quick Start Guide Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
- Page 4 8. Select the DataCapturedemo_xWR.lua file from the \mmwaveStudio\Scripts\ folder by clicking on the browse button, then click on the run button. Figure 5. Capture and Post ADC Data DCA1000EVM Quick Start Guide SPRUIK7 – May 2018 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
- Page 5 Data is captured by the captured card for a sample profile and frame, and the captured data is processed and displayed as shown in Figure Figure 6. Visualization of the Captured Raw ADC Data SPRUIK7 – May 2018 DCA1000EVM Quick Start Guide Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated...
- Page 6 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
Need help?
Do you have a question about the DCA1000EVM and is the answer not in the manual?
Questions and answers