Table of Contents
Advertisement
10. This will take you to the screen above that should be
and will have the cursor on the hour, use the up ▲ or
down ▼ buttons to change this number to the
appropriate hour (this is in 24 hour format) example
9PM would be "21". Next press the enter
to place the cursor on the "Min" number, then use the
up ▲ or down ▼ arrow buttons to change this number
to the actual minute.
S e t T i m e / D a t e
T i m e :
1 3 : 0 8
D a t e :
1 / 0 3 / 1 8
11. Next press the enter
on the "Day" number, then use the up ▲ or down ▼
arrow buttons to change this number to the actual day
of the month. Next press the enter
place the cursor on the "Month" number, then use the
up ▲ or down ▼ arrow buttons to change this number
to the actual month. Next press the enter
to place the cursor on the "Year" number, then use the
up ▲ or down ▼ arrow buttons to change this number
to the actual year. Then press the escape
T i m e / D a t e
to exit this screen and it will take you to the top level
screen. By using the down ▼ arrow button until you get
T i m e :
0 0 : 0 0 : 0 0
to the screen showing the time and date to make sure
D a t e :
0 0 : 0 0 : 0 0
they are changed.
s e t t i m e / d a t e :
12. If you arrow down ▼ once again it will take you to the
screen above right displaying the program part number
P C O : 0 0 0
and rev information.
S o f t w a r e
1 0 8 0 1 0 9 1 R e v 1
13. If you arrow down ▼ once again it will take you to back
to the first screen (see #3).
0 %
14. The Alarm button
alarm.
0 %
0 %
IM 777-18 • SKYLINE OUTDOOR AIR HANDLER
button again
„
( 2 4 h r )
button again to place the cursor
„
button again to
„
button again
„
button
e
M
N O
o
F
will light up red when the unit is in
15. To view the alarms;
a. Push the Alarm Bell button
using the up ▲ and down ▼ arrow buttons to view
all the alarms before resetting.
b. Next, press the Enter button
all of the alarms before viewing them.
c. If you press the Enter button
up ▲ and down ▼ arrow buttons to scroll through
the alarms you will not know if the unit was down
on more than one alarm.
16. To view what Alarms the unit has faulted on press the
up ▲ or down ▼ arrow to see what alarm that has
caused the unit to shut down. Then press the escape
button to exit this screen and it will take you to the top
level screen.
* * * * * A L A R M * * * * *
P r e s s E n t e r t o
R e s e t A L L A l a r m s
A r r o w t o V i e w A l a r m s
17. If you happen to press the Program button
need to have the Service Password to proceed, or just
press the escape
e
take you to the top level screen.
E n t e r P a s s w o r d
F o r C o n f i g u r a t i o n
0
18. The Program password is used to enter other parts
of the program, like the Service Menu. (This is not
recommended for the basic user, only for a qualified
trained service technicians)
60
G
f
as
and then scroll
if you want to reset
„
before pushing the
„
you will
fi
button to exit this screen and it will
www.DaikinApplied.com
urnaCe
e
Hide quick links:
Advertisement
Table of Contents
