Mitsubishi Electric 800 Series Function Manual page 6

Wiring
Connection cable
For wiring, use the 1000BASE-T compliant Ethernet cables.
Ethernet cable
Category 5e or higher
(Double shielded/STP) Straight cable
• Recommended products (as of April 2019)
Model
SC-E5EW series


SC-E5EW cable is for in-enclosure and indoor uses. SC-E5EW-L cable is for outdoor use.
NOTE
• For CC-Link IE TSN wiring, use the recommended wiring components by CC-Link Partner Association.
• Depending on the cable connector shape, the cable may not be able to be connected to the communication connector.
Hubs
To connect only the authentication class B devices in star topology when the communication speed of the master station is 1
Gbps, use a CC-Link IE TSN compatible switching hub (TSN switching hub).
• Industrial switching hub
Name
TSN switching hub Authentication class B CC-Link IE TSN compatible switching hub certified by the CC-Link Partner Association.
6
INTRODUCTION
Connector
RJ-45 connector
Manufacturer
Mitsubishi Electric System & Service Co., Ltd.
The following conditioning cables:
• IEEE 802.3 (1000BASE-T)
• ANSI/TIA/EIA-568-B (Category 5e)
Description
Type