VTech SIP Contemporary Series Master User Manual page 28

FCC Part 68 and ACTA
This equipment complies with Part 68 of the
FCC rules and with technical requirements
adopted by the Administrative Council for
Terminal Attachments (ACTA). The label on the
back or bottom of this equipment contains,
among other things, a product identifier in the
format US:AAAKXNANXXXX. This identifier must
be provided to your telephone service provider
upon request.
The plug and jack used to connect this
equipment to premises wiring and the
telephone network must comply with
applicable Part 68 rules and technical
requirements adopted by ACTA. A compliant
telephone cord and modular plug is provided
with this product. It is designed to be
connected to a compatible modular jack that
is also compliant. An RJ45 jack should normally
be used for connecting to a single line. See the
installation instructions in the user's manual.
The Ringer Equivalence Number (REN) is
used to determine how many devices you
may connect to your telephone line and still
have them ring when you are called. The
REN for this product is encoded as the 6th
and 7th characters following the US: in the
product identifier (e.g., if ## is 03, the REN is
0.3). In most, but not all areas, the sum of all
RENs should be five (5.0) or less. For more
information, please contact your telephone
service provider.
This equipment may not be used with Party
Lines. If you have specially wired alarm dialing
equipment connected to your telephone line,
ensure the connection of this equipment does
not disable your alarm equipment. If you
have questions about what will disable alarm
equipment, consult your telephone service
provider or a qualified installer.
If this equipment is malfunctioning, it must be
unplugged from the modular jack until the
problem has been corrected. Repairs to this
telephone equipment can only be made by
the manufacturer or its authorized agents.
For repair procedures, follow the instructions
outlined under VTech Hospitality limited
warranty program in the user's manual.
To ensure safety of users, the FCC has
established criteria for the amount of radio
frequency energy of the product. This product
has been tested and found to comply with the
FCC criteria. The handset may be safely held
against the ear of the user. The telephone
base shall be installed and used such that
parts of the user's body other than the hands
are maintained at a distance of approximately
20 cm (8 inches) or more.
If this equipment is causing harm to the
telephone network, your telephone service
provider may temporarily discontinue your
telephone service. Your telephone service
provider is required to notify you before
interrupting service. If advance notice is not
practical, you will be notified as soon as
possible. You will be given the opportunity
to correct the problem and your telephone
service provider is required to inform you of
your right to file a complaint with the FCC.
Your telephone service provider may make
changes in its facilities, equipment, operation,
or procedures that could affect the proper
functioning of this product. Your telephone
service provider is required to notify you if such
changes are planned.
If this product is equipped with a corded or
cordless handset, it is hearing aid compatible.
If this product has memory dialing locations,
you may choose to store emergency telephone
numbers (e.g., police, fire, medical) in these
locations. If you do store or test emergency
numbers, please:
Remain on the line and briefly explain the
reason for the call before hanging up.
Perform such activities in off-peak hours, such
as early morning or late evening.
When the adjunct is used with a leased system,
permission of the owner of the equipment
EN - 28