Operate; Sip Contemporary Cordless Accessory Handset; Ctm-S2415Hc - VTech SIP Contemporary Series Master User Manual

Operate

SIP Contemporary Cordless 1-line-
CTM-S2415
SIP Contemporary Cordless
Handset & Charging stand -

CTM-S2415HC

Using the cordless handset and the
telephone base
The cordless handset and the telephone
base cannot be used on the same call.
However, calls can be switched between the
cordless handset and the telephone base
speakerphone.
When the cordless handset or the telephone
base is in use, the FLASH/TALK key on the
cordless handset and the MESSAGE WAITING
LED on the telephone base illuminate.
Receive a call
When there is an incoming call, the telephone
rings and the MESSAGE WAITING LED flashes.
Answer a call using the cordless handset
while it is not on the telephone base or
charging base
On the cordless handset, press FLASH/TALK or
/ SPEAKER.
• The FLASH/TALK key illuminates when in use.
The / SPEAKER key illuminates when in
speakerphone mode.
Answer a call using the cordless handset
while it is cradled on the telephone base
or charging base
Lift the cordless handset from the telephone
base or charging base.
• The FLASH/TALK key illuminates when in use.
/ SPEAKER key illuminates when in
The
speakerphone mode.
Answer a call using the telephone base
On the telephone base, press
• The MESSAGE WAITING LED and the
SPEAKER key illuminate when in use.
Accessory
Place a call
Place a call using the cordless handset
On the cordless handset, press FLASH/TALK or
/ SPEAKER. Listen for a dial tone and then
dial the desired number, or press a Speed
Dial key on the cordless handset to dial a
programmed number.
• The FLASH/TALK key illuminates when in use.
The
speakerphone mode.
Place a call using the telephone base
On the telephone base, press
Listen for a dial tone and then dial the desired
number, or press a Speed Dial key on the
telephone base to dial a programmed number.
• The MESSAGE WAITING LED and the
SPEAKER key illuminate when in use.
End a call
End a call when using the cordless
handset
Press OFF on the cordless handset or place it
in the telephone base or charging base. The
call ends when all handsets hang up.
End a call when using the telephone base
Press
Switch a call between the cordless
handset and the telephone base
speakerphone
•
handset to the telephone base
speakerphone, press
telephone base.
EN - 15
/ SPEAKER key illuminates when in
/ SPEAKER.
To switch a call from the cordless
SPEAKER on the
/ SPEAKER.
/
/ SPEAKER.
/