VTech S1310 Master User Manual

Classic trimstyle/cordless 1/2-line hotel telephone/classic charging base/stand/classic cordless 1/2-line accessory handset/contemporary cordless 1/2-line accessory handset

Hide thumbs Also See for S1310:

User manual (94 pages)

Master user manual (126 pages)

Table of Contents

Quick Links

Need help?

Do you have a question about the S1310 and is the answer not in the manual?

Questions and answers

Summary of Contents for VTech S1310

Page 1 S I P C o r d l e s s S e r i e s Master User Guide Models: SIP classic trimstyle 1-line hotel telephone - S1310/ SIP classic trimstyle 2-line hotel telephone - S1320/ SIP classic cordless 1-line hotel telephone - S1410/...
Page 2: Important Safety Instructions
Important safety instructions and injury, including the following: This product should only be connected to the host equipment and never directly to the network such as Public Switch Telephone Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions: In wall mounting position, make sure to mount the telephone base on the wall by aligning the eyelets with the mounting studs of...
Page 3: Importantes Mesures De Sécurité
IMPORTANTES MESURES DE SÉCURITÉ Certaines mesures de sécurité doivent être prises pendant l’utilisation de d’incendie, de choc électrique CONSERVER CES INSTRUCTIONS...
Page 4: Parts Checklist
Parts checklist Items contained in the respective telephone package: Model name Model number Parts included SIP classic S1310 trimstyle 1-line Mounting bracket Telephone base Corded handset with a screw Cat-5 network cables (2) SIP classic S1320 trimstyle 2-line Mounting bracket...
Page 5 Parts checklist Items contained in the respective telephone package: Model name Model number Parts included SIP contemporary S2310 trimstyle 1-line Mounting bracket Telephone base Corded handset with a screw Cat-5 network cables (2) SIP contemporary S2310-6VDC trimstyle 1-line Telephone base Mounting bracket Telephone base Corded handset...
Page 6 Parts checklist Items contained in the respective telephone package: Model name Model number Parts included SIP contemporary C4300 charging base Mounting bracket Charging base with a screw Cat-5 network cable SIP contemporary C4310 charging stand Charging stand Cat-5 network cable SIP contemporary C4400 cordless 1-line...
Page 7: Telephone Layout
Telephone layout SIP classic trimstyle 1-line - S1310 +/VOLUME/- MESSAGE WAITING TALK HOLD FLASH REDIAL MUTE /SPEAKER Wall mount clip POWER...
Page 8 Telephone layout SIP classic trimstyle 2-line - S1320 +/VOLUME/- MESSAGE WAITING LINE 2 LINE 1 HOLD CONF FLASH MUTE /SPEAKER REDIAL Wall mount clip POWER...
Page 9 Telephone layout SIP classic cordless 1-line - S1410 RJ-45 LAN port MESSAGE WAITING RJ-45 COMPUTER port /USB CHARGE ONLY (USB port for charging only) Wall mount clip Speed Dial keys REDIAL FLASH /FIND HANDSET MUTE +/- VOLUME /SPEAKER LINE HOLD CHARGE +/VOLUME/- MESSAGE WAITING...
Page 10 Telephone layout SIP classic cordless 2-line - S1420 RJ-45 LAN port MESSAGE WAITING RJ-45 COMPUTER port /USB CHARGE ONLY (USB port for charging only) Wall mount clip Speed Dial keys REDIAL FLASH /FIND HANDSET MUTE +/- VOLUME /SPEAKER HOLD CONF CHARGE LINE 1 LINE 2 +/VOLUME/-...
Page 11: Sip Classic Charging Base - C3300
Telephone layout SIP classic charging base - C3300 Wall mount clip CHARGE...
Page 12 Telephone layout SIP classic cordless 1-line accessory handset - C3400 +/VOLUME/- MESSAGE WAITING TALK HOLD REDIAL FLASH MUTE /SPEAKER LOW BATTERY...
Page 13 Telephone layout SIP classic cordless 2-line accessory handset - C3500 +/VOLUME/- MESSAGE WAITING LINE 2 LINE 1 HOLD CONF FLASH MUTE /SPEAKER REDIAL LOW BATTERY...
Page 14 Telephone layout SIP contemporary trimstyle 1-line - S2310/S2310-6VDC -/VOLUME/+ MESSAGE WAITING TALK HOLD REDIAL FLASH /SPEAKER MUTE INTERCOM Wall mount clip POWER...
Page 15 Telephone layout SIP contemporary trimstyle 1-line - CTM-S2311 -/VOLUME/+ MESSAGE WAITING TALK HOLD FLASH MUTE /SPEAKER REDIAL MESSAGES Speed Dial keys Wall mount clip POWER...
Page 16 Telephone layout SIP contemporary trimstyle 2-line - S2320/S2320-6VDC -/VOLUME/+ MESSAGE WAITING LINE 2 LINE 1 HOLD CONF FLASH /SPEAKER MUTE REDIAL INTERCOM Wall mount clip POWER...
Page 17 Telephone layout SIP contemporary trimstyle 2-line - CTM-S2321 -/VOLUME/+ MESSAGE WAITING LINE 2 CONF LINE 1 FLASH HOLD MUTE /SPEAKER REDIAL MESSAGES Speed Dial keys Wall mount clip POWER...
Page 18 Telephone layout SIP contemporary cordless 1-line - S2410 RJ-45 LAN port MESSAGE WAITING RJ-45 COMPUTER port /USB CHARGE ONLY (USB port for charging only) Wall mount clip Speed Dial keys REDIAL FLASH /FIND HANDSET MUTE +/VOLUME -/VOLUME /SPEAKER HOLD CHARGE LINE -/VOLUME/+ MESSAGE WAITING...
Page 19 Telephone layout SIP contemporary cordless 1-line - CTM-S2411 RJ-45 LAN port MESSAGE WAITING RJ-45 COMPUTER port /USB CHARGE ONLY (USB port for charging only) Wall mount clip Speed Dial keys PAUSE (recessed key) PROGRAM (recessed key) Speed Dial key REDIAL FLASH /FIND HANDSET MUTE...
Page 20 Telephone layout SIP contemporary cordless 2-line - S2420 RJ-45 LAN port MESSAGE WAITING RJ-45 COMPUTER port /USB CHARGE ONLY (USB port for charging only) Wall mount clip Speed Dial keys REDIAL FLASH /FIND HANDSET MUTE +/VOLUME -/VOLUME /SPEAKER HOLD CONF LINE 1 LINE 2 CHARGE -/VOLUME/+...
Page 21 Telephone layout SIP contemporary cordless 2-line - CTM-S2421 RJ-45 LAN port MESSAGE WAITING RJ-45 COMPUTER port /USB CHARGE ONLY (USB port for charging only) Wall mount clip Speed Dial keys PAUSE (recessed key) PROGRAM (recessed key) Speed Dial key REDIAL FLASH /FIND HANDSET MUTE...
Page 22 Telephone layout SIP contemporary charging base - C4300 Wall mount clip CHARGE...
Page 23 Telephone layout SIP contemporary charging stand - C4310 CHARGE...
Page 24 Telephone layout SIP contemporary cordless 1-line accessory handset - C4400 -/VOLUME/+ MESSAGE WAITING TALK HOLD REDIAL FLASH /SPEAKER MUTE INTERCOM LOW BATTERY...
Page 25 Telephone layout SIP contemporary cordless 1-line accessory handset - C4401 -/VOLUME/+ MESSAGE WAITING TALK HOLD FLASH REDIAL /SPEAKER MUTE MESSAGES Speed Dial keys LOW BATTERY...
Page 26 Telephone layout SIP contemporary cordless 2-line accessory handset - C4500 -/VOLUME/+ MESSAGE WAITING LINE 2 LINE 1 HOLD CONF FLASH /SPEAKER MUTE REDIAL INTERCOM LOW BATTERY...
Page 27 Telephone layout SIP contemporary cordless 2-line accessory handset - C4500 -/VOLUME/+ MESSAGE WAITING LINE 2 CONF LINE 1 FLASH HOLD REDIAL /SPEAKER MUTE MESSAGES Speed Dial keys LOW BATTERY...
Page 28 Installation SIP classic trimstyle 1-line/2-line - S1310/S1320 Telephone base installation Installation option - desktop position Connect the Cat-5 network cable into the telephone base and route through the channel as shown below Plug the other end of the Cat-5 network cable into the network wall jack with Power over Ethernet (PoE) Then connect the...
Page 29: Installation Option - Converting From Desktop To Wall Mount Position
Installation SIP classic trimstyle 1-line/2-line - S1310/S1320 Installation option - converting from desktop to wall mount position Protruding edge grooves of the telephone base Insert the tabs Eyelets Plug the Cat-5 network cable back to the network wall jack with Power over Ethernet (PoE) Then replace the handset on the...
Page 30 Installation SIP classic trimstyle 1-line/2-line - S1310/S1320 Handset registration S1310/S1320 handset must be registered to an S1410/S1420 To register an S1310 handset: Place the corded handset on the S1410 is placed on the S1410 MESSAGE WAITING S1410 When you already have 4 registered handsets, you...
Page 31 Installation SIP classic cordless 1-line/2-line - S1410/S1420 Telephone base installation Network wall jack with Power over Ethernet(PoE) Cat-5 network cable Once installed, the telephone begins a four-step • For S1410: (1) The MUTE key and the /SPEAKER MUTE MUTE /SPEAKER MESSAGE WAITING LINE, MUTE and /SPEAKER...
Page 32 Installation SIP classic cordless 1-line/2-line - S1410/S1420 Handset battery installation Place the battery with the label THIS SIDE UP To replace the handset cover, align all the tabs on the handset cover against the corresponding grooves on the handset, then FCC ID Replace a handset battery Use a narrow object to open the screw cover and then...
Page 33 Installation SIP classic cordless 1-line/2-line - S1410/S1420 Installation option - converting from desktop to wall mount position To mount the telephone base on the wall: On the telephone base, place a coin in the slit of the wall mount cordless handset Protruding edge press the tabs of the mounting Mounting...
Page 34 Installation SIP classic charging base - C3300 Charging base installation Installation option - desktop position Connect the Cat-5 network cable into the Plug the other end of the Cat-5 network cable into the network wall jack with Power over Ethernet (PoE) Installation option - converting from desktop to wall mount position On the charging base, place a coin in the slit of the wall mount clip Protruding edge...
Page 35 Installation SIP classic cordless 1-line/2-line accessory handset - C3400/C3500 Handset battery installation Place the battery with the label THIS SIDE UP To replace the handset cover, align all the tabs on the handset cover against the corresponding grooves on the handset, then FCC ID Replace a handset battery then twist and lift to remove the handset...
Page 36 Installation SIP contemporary trimstyle 1-line/2-line - S2310/S2320 Telephone base installation Installation option - desktop position Connect the telephone base Screw Plug the Cat-5 network cable into the network wall jack with Power over Ethernet (PoE) Then connect the coiled handset cord to Network wall jack with Power over Ethernet (PoE) CAUTION: To order a replacement, call 1-888-907-2007...
Page 37 Installation SIP contemporary trimstyle 1-line/2-line - S2310/S2320 Installation option - converting from desktop to wall mount position On the telephone base, place a coin in the slit of the wall mount clip and rotate a half turn Protruding edge grooves of the telephone base Screw telephone base Eyelets...
Page 38 Installation SIP contemporary trimstyle 1-line - S2310-6VDC/CTM-S2311 SIP contemporary trimstyle 2-line - S2320-6VDC/CTM-S2321 Telephone base installation Installation option - desktop position Route the small end of the power adapter cord out from the top Power jack Screw Plug the large end of the power adapter into the electrical outlet not controlled by a wall switch Then connect the coiled handset...
Page 39 Installation SIP contemporary trimstyle 1-line - S2310-6VDC/CTM-S2311 SIP contemporary trimstyle 2-line - S2320-6VDC/CTM-S2321 Installation option - converting from desktop to wall mount position On its telephone base, place a coin in the slit of the wall mount clip and rotate a half turn Protruding edge of the telephone base Screw...
Page 40 Installation SIP contemporary trimstyle 1-line - S2310-6VDC/CTM-S2311 SIP contemporary trimstyle 2-line - S2320-6VDC/CTM-S2321 Handset registration S2310/S2320 handset must be registered to an S2410/S2420 CTM-S2311/CTM-S2321 handset must be registered to an CTM-S2411/CTM-S2421 To register an S2310/CTM-S2311 handset: Place the corded handset on the S2410/CTM-S2411 time a handset is placed on the S2410/CTM-S2411 MESSAGE WAITING S2410/CTM-S2411...
Page 41 Installation SIP contemporary cordless 1-line/2-line - S2410/CTM-S2411/S2420/CTM-S2421 Telephone base installation Installation option - desktop position grooves of the telephone Plug the Network wall jack with Power over Ethernet (PoE) Cat-5 network cable Once installed, the telephone begins a four-step • For S2410: (1) The MUTE key and the /SPEAKER he MUTE...
Page 42 Installation SIP contemporary cordless 1-line/2-line - S2410/CTM-S2411/S2420/CTM-S2421 Handset battery installation Place the battery with the label THIS SIDE UP To replace the handset cover, align all the tabs on the handset cover against the corresponding grooves on the handset, then FCC ID Replace a handset battery then twist and lift to remove the handset...
Page 43 Installation SIP contemporary cordless 1-line/2-line - S2410/CTM-S2411/S2420/CTM-S2421 Installation option - converting from desktop to wall mount position To mount the telephone base on the wall: On the telephone base, place a coin Protruding edge Mounting bracket Eyelets Plug the Cat-5 network cable back into the network wall jack with Power over Ethernet (PoE) Then replace the cordless handset on the telephone base cradle...
Page 44: Sip Contemporary Charging Base - C4300
Installation SIP contemporary charging base - C4300 Charging base installation Installation option - desktop position Screw Plug the Cat-5 network cable into the network wall jack with Power over Ethernet (PoE) Installation option - converting from desktop to wall mount position On the charging base, place a coin in the slit Protruding edge Screw...
Page 45: Sip Contemporary Charging Stand - C4310
Installation SIP contemporary charging stand - C4310 Charging stand installation Network wall jack with Power over Ethernet (PoE) Cat-5 network cable...
Page 46 Installation SIP contemporary cordless 1-line accessory handset - C4400/CTM-C4401 SIP contemporary cordless 2-line accessory handset - C4500/CTM-C4501 Handset battery installation Place the battery with the label THIS SIDE UP To replace the handset cover, align all the tabs on the handset cover against the corresponding grooves on the handset, then FCC ID Replace a handset battery then twist and lift to remove the handset...
Page 47: Telephone Settings
Telephone settings SIP classic trimstyle - S1310/S1320 SIP classic cordless 1-line/2-line - S1410/S1420 SIP contemporary trimstyle - S2310/S2310-6VDC/CTM-S2311/S2320/S2320-6VDC/CTM-S2321 SIP contemporary cordless 1-line/2-line - S2410/CTM-S2411/S2420/CTM-S2421 Please refer to the...
Page 48: Telephone Operation
Telephone operation SIP classic trimstyle 1-line - S1310 Receive a call When there is an incoming call, the telephone rings and the TALK To answer a call: Press TALK or /SPEAKER. The TALK /SPEAKER key illuminates when in speakerphone mode...
Page 49 Telephone operation SIP classic trimstyle 2-line - S1320 Receive a call To answer a call: /SPEAKER The respective line key illuminates when the phone /SPEAKER Place a call Press LINE 1, LINE 2 or /SPEAKER /SPEAKER End a call Press OFF Share a call During a call on line 1 or line 2, another handset can join the call by pressing the respective line key or /SPEAKER...
Page 50: Sip Classic Trimstyle 2-Line - S1320
Telephone operation SIP classic trimstyle 2-line - S1320 Conference call To initiate a conference call: Press HOLD Once the second party is on the line, press CONF To initiate a conference call while both calls are on hold: Press CONF To end a conference call: •...
Page 51 Telephone operation SIP classic cordless 1-line - S1410 Using the cordless handset and the telephone base When the cordless handset or the telephone base is in use, the TALK key on the cordless handset and the LINE key on the Receive a call When there is an incoming call, the telephone rings, the LINE key and the MESSAGE WAITING and the TALK...
Page 52 Telephone operation SIP classic cordless 1-line - S1410 Volume To adjust the listening volume: • During a call on the cordless handset, press +/VOLUME/- • During a call on the telephone base, press +/- VOLUME To adjust the ringer volume of the telephone base: When the telephone base is idle, press +/- VOLUME on it to adjust the ringer volume Call waiting When you hear a call waiting tone during a call, press FLASH...
Page 53 Telephone operation SIP classic cordless 2-line - S1420 Using the cordless handset and the telephone base When the cordless handset or the telephone base is in use, the corresponding line keys on the cordless handset and the telephone Receive a call When there is an incoming call, the telephone respective line key and the MESSAGE WAITING To answer a call using the cordless handset while it is not on the telephone base or charging base:...
Page 54 Telephone operation SIP classic cordless 2-line - S1420 Redial The last dialed number on the cordless handset or the telephone base To redial the last dialed number from the handset or the telephone base: Press LINE 1, LINE 2 or /SPEAKER REDIAL Volume...
Page 55 Telephone operation SIP classic cordless 2-line - S1420 Conference call initiate a conference call: Press HOLD Once the second party is on the line, press CONF To initiate a conference call while both calls are on hold: Press CONF To switch a conference call from the telephone base to the cordless handset: •...
Page 56 Telephone operation SIP contemporary trimstyle 1-line - S2310/S2310-6VDC Receive a call When there is an incoming call, the telephone rings and the TALK To answer a call: Press TALK or /SPEAKER. The TALK /SPEAKER key illuminates when in speakerphone mode Place a call Press TALK or /SPEAKER...
Page 57 Telephone operation SIP contemporary trimstyle 1-line - S2310/S2310-6VDC Intercom To initiate an intercom call: • Press INTERCOM INTERCOM key the main telephone base INTERCOM keys on other cordless handsets and INT key on the main telephone base To initiate an intercom call during a call: •...
Page 58 Telephone operation SIP contemporary trimstyle 1-line - CTM-S2311 Receive a call When there is an incoming call, the telephone rings and the TALK To answer a call: Press TALK or /SPEAKER. The TALK /SPEAKER key illuminates when in speakerphone mode Place a call Press TALK or /SPEAKER...
Page 59 Telephone operation SIP contemporary trimstyle 2-line - S2320/S2320-6VDC Receive a call To answer a call: /SPEAKER The respective line key illuminates when the phone line /SPEAKER Place a call Press LINE 1, LINE 2 or /SPEAKER /SPEAKER End a call Press OFF Share a call During a call on line 1 or line 2, another handset can join the call by pressing the respective line key or...
Page 60 Telephone operation SIP contemporary trimstyle 2-line - S2320/S2320-6VDC Intercom To initiate an intercom call: • Press INTERCOM INTERCOM key the main telephone base INTERCOM keys on the cordless handsets and INT key on the main telephone base To initiate an intercom call during a call: •...
Page 61 Telephone operation SIP contemporary trimstyle 2-line - S2320/S2320-6VDC Receive a call To answer a call: /SPEAKER The respective line key illuminates when the phone line /SPEAKER Place a call Press LINE 1, LINE 2 or /SPEAKER /SPEAKER End a call Press OFF Share a call During a call on line 1 or line 2, another handset can join the call by pressing the respective line key or...
Page 62 Telephone operation SIP contemporary trimstyle 2-line - S2320/S2320-6VDC Conference call To initiate a conference call: Press HOLD Once the second party is on the line, press CONF To initiate a conference call while both calls are on hold: Press CONF To end a conference call: •...
Page 63 Telephone operation SIP contemporary trimstyle 2-line - CTM-S2321 Receive a call To answer a call: /SPEAKER The respective line key illuminates when the phone line /SPEAKER Place a call Press LINE 1, LINE 2 or /SPEAKER /SPEAKER End a call Press OFF Share a call During a call on line 1 or line 2, another handset can join the call by pressing the respective line key or...
Page 64 Telephone operation SIP contemporary trimstyle 2-line - CTM-S2321 Receive a call To answer a call: /SPEAKER The respective line key illuminates when the phone line /SPEAKER Place a call Press LINE 1, LINE 2 or /SPEAKER /SPEAKER End a call Press OFF Share a call During a call on line 1 or line 2, another handset can join the call by pressing the respective line key or...
Page 65: Conference Call
Telephone operation SIP contemporary trimstyle 2-line - CTM-S2321 Conference call To initiate a conference call: Press HOLD Once the second party is on the line, press CONF To initiate a conference call while both calls are on hold: Press CONF To end a conference call: •...
Page 66 Telephone operation SIP contemporary cordless 1-line - S2410 Using the cordless handset and the telephone base When the cordless handset or the telephone base is in use, the TALK key on the cordless handset and the LINE key on the Receive a call When there is an incoming call, the telephone LINE key and the MESSAGE WAITING...
Page 67 Telephone operation SIP contemporary cordless 1-line - S2410 Volume To adjust the listening volume: • During a call on the handset, press -/VOLUME/+ • During a call on the telephone base, press +/VOLUME or -/VOLUME To adjust the ringer volume of the telephone base: When the telephone base is idle, press +/VOLUME or -/VOLUME on it to adjust the ringer volume Call waiting When you hear a call waiting tone during a call, press FLASH on the cordless handset or the telephone base to put the current...
Page 68 Telephone operation SIP contemporary cordless 1-line - S2410 To answer an intercom call: • base, charging base or charging stand, or press INTERCOM on the cordless handset when it is not cradled on the telephone base, -OR- • Press INT or /SPEAKER To answer an incoming call during an intercom call: Press TALK on the cordless handset or press...
Page 69 Telephone operation SIP contemporary cordless 1-line - CTM-S2411 Using the cordless handset and the telephone base When the cordless handset or the telephone base is in use, the TALK key on the cordless handset and the LINE key on the Receive a call When there is an incoming call, the telephone LINE key and the MESSAGE WAITING...
Page 70 Telephone operation SIP contemporary cordless 1-line - CTM-S2411 Volume To adjust the listening volume: • During a call on the handset, press -/VOLUME/+ • During a call on the telephone base, press +/VOLUME or -/VOLUME To adjust the ringer volume of the telephone base: When the telephone base is idle, press +/VOLUME or -/VOLUME on it to adjust the ringer volume Call waiting When you hear a call waiting tone during a call, press FLASH on the cordless handset or the telephone base to put the current...
Page 71 Telephone operation SIP contemporary cordless 2-line - S2420 Using the cordless handset and the telephone base When the cordless handset or the telephone base is in use, the corresponding line keys on the cordless handset and the telephone Receive a call When there is an incoming call, the telephone corresponding line key and the MESSAGE WAITING telephone base...
Page 72 Telephone operation SIP contemporary cordless 2-line - S2420 Redial To redial the last dialed number: Press LINE 1, LINE 2 or /SPEAKER REDIAL Volume To adjust the listening volume: • During a call on the handset, press -/VOLUME/+ • During a call on the telephone base, press +/VOLUME or -/VOLUME To adjust the ringer volume of the telephone base: When the telephone base is idle, press +/VOLUME or -/VOLUME on it to adjust the ringer volume Call waiting...
Page 73 Telephone operation SIP contemporary cordless 2-line - S2420 To answer an intercom call: • base, charging base or charging stand, or press INTERCOM on the cordless handset when it is not cradled on the telephone base, -OR- • Press INT or /SPEAKER To answer an incoming call during an intercom call: /SPEAKER...
Page 74 Telephone operation SIP contemporary cordless 2-line - CTM-S2421 Using the cordless handset and the telephone base When the cordless handset or the telephone base is in use, the corresponding line keys on the cordless handset and the telephone Receive a call When there is an incoming call, the telephone corresponding line key and the MESSAGE WAITING telephone base...
Page 75 Telephone operation SIP contemporary cordless 2-line - S2420 Redial To redial the last dialed number: Press LINE 1, LINE 2 or /SPEAKER REDIAL Volume To adjust the listening volume: • During a call on the handset, press -/VOLUME/+ • During a call on the telephone base, press +/VOLUME or -/VOLUME To adjust the ringer volume of the telephone base: When the telephone base is idle, press +/VOLUME or -/VOLUME on it to adjust the ringer volume Call waiting...
Page 76 Telephone operation SIP contemporary cordless 2-line - S2420 Conference call To initiate a conference call: Press HOLD Once the second party is on the line, press CONF To initiate a conference call while both calls are on hold: Press CONF To switch a conference call from the telephone base to the cordless handset: •...
Page 77: Troubleshooting
Appendix Troubleshooting The telephone does not work at all. • Make sure the Cat-5 network cable is plugged into the LAN port of the telephone base and the network wall jack with • Make sure the battery is installed and charged correctly (pages 29, 32, 39 and 43 cordless handset to the telephone base, charging base or charging stand •...
Page 78 Appendix Troubleshooting The battery does not charge in the cordless handset or the battery does not accept charge. • CHARGE • • If the cordless handset is in the telephone base, charging base or charging stand but the CHARGE The CHARGE LED is off •...
Page 79: Precautions For Users Of Implanted Cardiac Pacemakers
® The RBRC program provides a convenient alternative to placing used nickel-metal hydride batteries into the ® VTech’s participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating ® in the RBRC 1 (800) 8 BATTERY ®...
Page 80: Vtech Hospitality Limited Warranty Program
If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair and return shipping costs for the repair of Products that not...
Page 81: Fcc, Acta And Ic Regulations
Appendix FCC, ACTA and IC regulations FCC Part 15 of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the cause harmful interference, and (2) this device must accept any interference received, including interference that may cause For cordless telephone only - To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must...
Page 82: Appendix Maintenance
Appendix Maintenance Taking care of your telephone Avoid rough treatment Avoid water Electrical storms Cleaning your telephone...
Page 83 Appendix SIP classic trimstyle 1-line/2-line - S1310/S1320 Power requirement PoE class 2 powered (48V) Frequency control Transmit frequency Channels Nominal effective range Message waiting signal From SIP server Size Corded handset: SIP classic cordless 1-line/2-line - S1410/S1420 Power requirement Telephone base: PoE class 2 powered (48V)
Page 84 Appendix SIP contemporary trimstyle 1-line/2-line - S2310/S2320 Power requirement PoE class 2 powered (48V) Frequency control Transmit frequency Channels Nominal effective range Message waiting signal From SIP server Size Telephone base: Corded handset: SIP contemporary trimstyle 1-line/2-line - S2310-6VDC/S2320-6VDC SIP contemporary trimstyle 1-line/2-line - CTM-S2311/CTM-S2321 Power requirement Frequency control Transmit frequency...
Page 85 Appendix SIP comtemporary cordless 1-line accessory handset - C4400/CTM-C4401 SIP comtemporary cordless 2-line accessory handset - C4500/CTM-C4501 Power requirement Frequency control Transmit frequency Channels Nominal effective range Message waiting signal From SIP server Speed Dial memory Size SIP contemporary charging base - C4300 Power requirement PoE class 2 powered (48V) Size...
Page 86 Register a handset to another telephone base 20 Replace a handset battery 22 Ringer volume 40 C3300 7 C3400 8 C3500 9 C4300 14 S1310 3 18 20 C4310 15 S1320 4 18 20 37 38 C4400 16 S1410 5...

This manual is also suitable for:

S1420 S1320 S1410 C3300 C3400 C3500 ... Show all