Table of Contents
Advertisement
Chapter 3. Configuration
Selection
A
S
PPLY
ETTINGS
Note: Additional configuration selections are available for V.35 interfaces. These selections
are listed in Table 3-2.
Table 3-2. Additional V.35 Interface Port Configuration Selections
Selection
CS
TR
SR
3-8
Table 3-1. HSSI and V.35 Configuration Selections
Description
Select this field after making all configuration changes for the selected
port. The changes are then applied to the unit immediately. Applying the
settings briefly affects all ports of the T3SU 300. You may cancel
changes made to the current
the ESC key.
Description
Selects the control mode for the clear to send (CS) lead.
F
O
: The CS lead remains on and request to send (RS) is
ORCED
N
ignored as long as the unit is synchronized and able to pass data.
F
RS
: The CS state matches the RS state.
OLLOW
Selects the T3SU 300's response to the data terminal ready (TR) lead.
I
: The T3SU 300 ignores the state of the TR lead.
GNORED
I
W
O
: The T3SU 300 suspends traffic on the selected port if
DLE
HEN
FF
the TR lead is off.
Selects the control mode for the data set ready (SR) lead.
F
O
: The SR control lead remains on regardless of the state of
ORCED
N
the network.
O
W
OOS/OOF
FF
HEN
T3SU 300 receives an out of service/out of frame (OOS/OOF) condition
from the network.
O
W
T
: The SR lead remains on except when the T3SU 300
FF
HEN
EST
is executing a test.
O
W
OOS/OOF
FF
HEN
when the unit receives an OOS/OOF condition from the network or when
the unit is executing a test.
T3SU 300 User Manual
P
C
ORT
ONFIGURATION
: The SR control lead remains on unless the
T
: The SR lead remains on except
OR
EST
menu by pressing
61200217L1-1
Advertisement
Table of Contents
