Toro DD4045 Software Manual page 7

4. Release the rocker switch to proceed to the next
step in the sequence
Figure 29
5. Hold the lower section of the rocker switch
(Figure 30) until the cam assembly fully rotates
forward to the rack and the elevators lift the
remaining pipe into the pipe box
Figure 30
Figure 31
(Figure 29).
(Figure 31).
6. Release the rocker switch to proceed to the next
step in the sequence
g231718
7. Hold the lower section of the rocker switch
(Figure 33) until the loader arms rotate toward
the pipe box. As they rotate past the cam
assembly the pipe grippers close on the pipe,
bringing it to the drill string
g210462
g232383
7
(Figure 32).
Figure 32
(Figure 34).
Figure 33
Figure 34
g231719
g210462
g232384