Toro DD4045 Software Manual page 10

Figure 45
Figure 46
Figure 47
Settings Screen Options
Carriage Settings Screen
Push button 1 on the Settings screen.
Use this screen to change the carriage settings. Use
the up and down arrows to rotate between push pipe,
pull pipe, and neutral.
Push the OK button to turn SmartTouch™ on and off.
g034779
Control Mode Screen
Push button 2 on the Settings screen.
Use this screen to select between the 2 joystick
control options. Push the up and down arrows to to
g034780
switch between Mode I and Mode II.
•
Mode I—The right joystick controls the thrust and
the rotation functions. The left joystick controls the
g034781
wrench and pipe loader functions.
•
Mode II—The right joystick controls the thrust and
the pipe loader elevator function. The left joystick
controls the rotation, wrench, and pipe loader
functions.
10
Figure 48
Figure 49
g233212
g224024