Advertisement
8.
Release the rocker switch to proceed to the next
step in the sequence
Figure 17
9.
Hold the lower section of the rocker switch
(Figure
18) until the cam assembly rotates to the
selected row under the pipe box
Figure 18
Figure 19
(Figure
17).
(Figure
19).
10.
Release the rocker switch to proceed to the next
step in the sequence
g231715
11.
Hold the lower section of the rocker switch
(Figure
21) until the elevator puts the pipe back
in the pipe box and the cam rotates to the home
position
(Figure
g210462
g232379
12.
Release the rocker switch to start the pull-pipe
process again.
5
(Figure
20).
Figure 20
22).
Figure 21
Figure 22
g231716
g210462
g232380
Advertisement
