Advertisement
4.
Release the rocker switch to proceed to the next
step in the sequence
Figure 11
5.
Break the pipe connection; refer to Removing
Drill Pipes in the Operator's Manual.
6.
Hold the upper button on the joystick to grip the
pipe
(Figure 12
and
button.
Figure 12
Figure 13
(Figure
11).
Figure
13) and release the
7.
Hold the lower section of the rocker switch
(Figure
15) until the arms rotate with the pipe
back to the home position and the grippers open
as the pipe enters the cam assembly pocket
(Figure
16).
g231713
g210533
g232377
4
Figure 14
Figure 15
Figure 16
g231714
g210462
g232378
Advertisement
