Advertisement
Pushing Pipe in SmartTouch Mode
Start the SmartTouch mode with the cam assembly in
the home position (row 4 of the pipe box).
Important:
Ensure that you hold the lower section
of the cam rocker switch, on the left joystick,
completely down until the action is complete in
each step
(Figure
23).
Figure 23
Hold the upper section of the cam rocker switch,
on the left joystick, completely down until all
actions are complete to go to the previous step in
the sequence
(Figure
Figure 24
1.
Push button 1 to select push pipe
2.
Push buttons 2 and 3 to select the row where
you want to get the pipe
24).
(Figure
(Figure
25).
1. Push pipe
3.
Hold the lower section of the rocker switch
g210060
(Figure
selected row and the elevator lowers the pipe
into the opening
g210061
25).
6
Figure 25
2. Select pipe row
27) until the cam assembly rotates to the
(Figure
28).
Figure 26
Figure 27
Figure 28
g232387
g231717
g210462
g232382
Advertisement
