Initializing The Temp Map - ADTRAN 1202076L1 User Manual

Normally, map configuration involves these steps.
Step
1 Initializes the Temp Map to one of three config-
urations (current Map A, current Map B, or all
IDLEs). This step is optional.
2 Edits the Temp Map so that it reflects the
desired map configuration.
Replaces the current DS0 map A or B configura-
3
tion with the Temp Map configuration.

Initializing the Temp Map

Upon entering the DS0 maps configuration menu, the Temp Map re-
flects its last configured state. You can then use the following selections.
Use selections... To initialize...
1, 2, 3
1, 2
3
61202076L1-1
Chapter 8. Telnet/Terminal Menus
Action
the displayed Temp Map to one of three
configurations.
the Temp Map from its current configura-
tion to one which reflects the currently
stored Map A or B configurations, respec-
tively.
the Temp Map to an all IDLE state.
TSU 600 User Manual 8-3