Table of Contents
Advertisement
Data Port Identification
When configuring the unit, menu selections will include options from
data port submenus. Selecting of data ports is necessary because the
TSU 600 uses a Slot-Port method to identify which data port the menu
item is referencing. If a module containing a
with an
Nx56/64 plug-on interface
be designated as:
DSX-1 Passthru=6.1
Where slot=6 and port =1.
The DSX-1 is located in option slot 6 and is the first port in that slot.
Nx56/64=6.2
Where slot=6 and port=2.
The Nx is located in Slot 6 and is the second port in that slot.
Viewed from the rear of the TSU 600, the module slots are arranged as
shown in Figure 3-4.
SLOT 1
SLOT 2
SLOT 3
Figure 3-4.
61202076L1-1
is installed in option slot 6, it would
SLOT 4
SLOT 5
SLOT 6
Module Slots, TSU 600
TSU 600 User Manual
Chapter 3. Operation
PBX DSX-1 option card
3-9
Advertisement
Table of Contents
