Create Temp Example - ADTRAN 1202076L1 User Manual

 
REVIEW MAP
A(B)
REVIEW TEMP
EDIT TEMP
APPLY TEMP > A Writes the Temp map into Map A. Pressing

Create Temp Example

A sample selection follows for
DS0: 01 to 24
PORT: IDLE , TST
designates which DS0s are used for QRSS testing when activated
TST
under the TEST
is identical to
61202076L1-1
Permits a quick review of the number of
DS0s assigned to each port and the number
of unassigned DS0s (
in the currently applied Map A(B).
This menu item is operated the same for
the Temp map as is 3)REVIEW MAP A or
Map B.
The map in the Temp file can be edited to
whatever configuration is desired. If Map
A had been copied into the Temp file, then
after editing, the Temp file could be
applied to MAP A or MAP B. The menu
operation is identical to
with the exception that the existing port
selections display.
Apply is usually the last step in updating a
map and is accessed automatically at the
end of editing or creating a temporary
map. It can be bypassed at this time by
selecting another menu choice.
Create Temp
, + option module ports
Menu. When not used for testing, the
IDLE .
TSU 600 User Manual
Chapter 5. Configuration Menu
  
or ) as defined
Idle TST
2) CREATE TEMP
:
TST designation
5-13