Advertisement
5.
Fill the spark plug hole with 3-5ml of clean engine oil for two-stroke air-cooled engines.
6.
Slowly pull the starter cord several times so that the inner surfaces of the cylinder and piston
are covered with oil.
7.
Install the piston in the upper position (pull the starter cord, keeping track of the position of the
piston through the spark plug hole).
8.
Install the spark plug in place.
Resumption of work after long-term storage
1.
Unscrew the spark plug.
2.
Turn the trimmer upside down and vigorously pull the starter cord several times to remove
excess oil from the combustion chamber. Do not allow any oil to remain in the spark plug cap.
3.
If necessary, clean, rinse in clean petrol and dry the spark plug or install a new one.
4.
Prepare the trimmer for use. Fill the fuel tank with freshly prepared fuel mixture.
Disposal
This marking indicates that this appliance should not be disposed with
other household wastes. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.
Advertisement
