Advertisement
WARNING:
vibrations may occur during operation and the blade may come loose,
causing injury to the operator or any third party.
Place the brush cutter on a flat, stable surface with the engine off on the fuel tank cap.
Make sure the brush cutter cover is in place.
1.
With your right hand, grab the handle located directly behind the handle-
protection. With your left hand, take the adjusting lever on the cutting unit. (Fig. 8).
2.
Press the release button after pressing the latch lock button (Fig. 9).
3.
While holding the latch, rotate the cutting unit with the adjustment lever (1) until it
straightens (Fig 26).
If the cutting blade is not aligned correctly, strong
1
1
2
Fig. 8
Adjusting lever
Fig. 9
Unlocking latch
Latch lock
Advertisement
