Work rules
WARNING:
Do not use a trimmer without a properly installed guard. During operation, monitor the
health and sharpness of the cord trimming blade. With the cover removed or defective, you
will not be able to control the length of the trimmer reel cord or the load on the motor and
driveshaft.
Note:
Use the cyclic mode when mowing: 1 minute in full gas mode, then 5-10 seconds idling
mode.
WARNING:
the engine. Long continuous operation of the engine at full RPM can
lead to overheating of the engine and its failure.
Main types of work
The main types of trimmer work are cutting, mowing, removing vegetation cover and
treating the lawn border.
All trimmer work should be done in full gas mode.
Idle mode is necessary to reduce the temperature inside
Fig. 13