Advertisement
Quick Links
Adaptor aktiv slider / tripod 75 mm - 100 mm
!
Part No.S2080-0005 (75 mm) S2080-0006 (100 mm)
Refer to aktiv system manual S2068-4980 for safety
!
instructions, and information regarding adjusting the aktiv bowl
connector
Max. payload: 10 kg (22 lb) for slider with 60 cm (23.6 in) length.
Please check the maximum payload specified by the slider manufacturer.
c
a
b
Attach the sideload plate to the underside of the slider using the screws provided and
tighten the screws firmly.
Hold the adaptor firmly with both hands. Pull the lever all the way back
towards the level bubble.
Lower the Adaptor onto the aktiv bowl stud and release the lever, the lever
should return to the locked position as shown below.
Locked Position
Remove the sideload plate.
a. Loosen the red clamp knob
b. Press the red release button
c. Lift out the sideload plate
Advertisement
Related Manuals for Sachtler Adaptor Aktiv Slider S2080-0005
Summary of Contents for Sachtler Adaptor Aktiv Slider S2080-0005
- Page 1 Adaptor aktiv slider / tripod 75 mm - 100 mm Part No.S2080-0005 (75 mm) S2080-0006 (100 mm) Refer to aktiv system manual S2068-4980 for safety instructions, and information regarding adjusting the aktiv bowl connector Max. payload: 10 kg (22 lb) for slider with 60 cm (23.6 in) length. Please check the maximum payload specified by the slider manufacturer.
- Page 2 When head is fitted to the slider you may use the same procedure to fine adjust and check the level. When fitting an aktiv head onto the the slider, adaptor S2080-0003 (75mm head) or S2080-0004 (100 mm head) will be required. www.sachtler.com Publication Part No. S2080-4982/0...