Table of Contents
Advertisement
Product Description
3.4 Operator Handle
6.6
6.5
5.3
6.3
5.6
5.3
Adjustment screw for the hovering posi-
tion
6.3
Pushbutton UP/DOWN
6.6
Control lever for releasing the load
3.5 Radio Remote Control (Optional)
The radio remote control enables wireless activation and deactivation of the vacuum generator.
6.1
6.1
Vacuum generator ON/OFF (transmitter)
3.6 Motor-Protection Switch
The motor-protection switch is used to switch the electrical vacuum generation on and off and provide
overvoltage protection. It can be integrated into the Schmalz crane column without the need for compli-
cated wiring and can be optionally locked.
See the motor-protection switch operating instructions in the appendix.
3.7 Gripper Types
The tube lifter JumboFlex can be operated with various grippers. The grippers must be approved for use
with this tube lifter.
The displayed figures are only examples. Depending on the particular design, they can differ from the
product.
For special grippers, refer to the operating instructions in the appendix.
14 / 52
5.6
Rotation unit latching bolt
6.5
Adjustment screw for the lowering speed
6.4
Receiver
6.4
EN-US · 30.30.01.02553 · 00 · 09/20
6.6
6.3
Advertisement
Table of Contents
