Operator Handle; Suction Cup - Schmalz Jumbo Sprint 45 Operating And Maintenance Instructions Manual

PRODUCT DESCRIPTION

2.11 Operator handle

The operator handle (6) consists of:
6.1 Operator handle
6.2 Valve unit
6.3 Grip
You pull up or press down the operator handle (6.1) to
lift, release, and lower the load.
On the operator handle, there are 2 adjustment screws for setting the hovering position of the tube
lifter (see chapter 5.3).

2.12 Suction cup

Various suction cups can be used depending on the load. Tests must be performed in accordance
with EN 14238 to verify that the suction cup is suitable for the load to be lifted (see chapter 5.5).
Single suction cups
Single suction cups, long
Round vacuum gripper
Sack gripper
Double suction cup
20 | EN
suction cups and their applications
www.schmalz.com
6.2
6.3
Glued cardboard boxes, sheets, furniture
bodies etc.
Pallets, narrow cardboard boxes, beams,
square tubes etc.
Barrels, buckets, stone slabs with rough
surfaces.
Option: Round vacuum gripper with
conductive foam.
Paper sacks (with plastic liner), plastic
sacks, raw rubber bales, shrink-wrapped
packages, etc.
Clamped, glued, strapped or open
cardboard boxes, crates and sheets etc.
The two suction cups are continuously
adjustable on the main beam.
6
6.1
30.30.01.00176/01