Safety Information; Conventions In This Document; Description; Product Overview - Dräger 2500 Instructions For Use Manual

1

Safety information

Before using this product, carefully read the Instructions

for Use.
Strictly follow the instructions for use. The user must fully

understand and strictly observe the instructions. Use the
product only for the purposes specified in the Intended use
section of this document.
Do not dispose of the instructions for use. Ensure that the

instructions for use are retained and appropriately used by
the product user.
Only trained and competent personnel are permitted to use

this product.
Comply with all local and national rules and regulations

associated with this product.
Only trained and competent personnel are permitted to use

inspect, repair and service the product. Dräger
recommends a Dräger service contract for all maintenance
activities and that all repairs are carried out by Dräger.
Use only original Dräger parts and accessories for

maintenance work. Otherwise the correct functioning of the
product may be impaired.
Do not use a faulty or incomplete product. Do not modify

the product.
Notify Dräger in the event of any product or product

component fault or failure.
The tests and test values in the instructions for use are

applicable for Dräger products. The owner or operator of
the test unit is responsible for adherence to the current and
valid test specifications of equipment to be tested.
2

Conventions in this document

Definitions of alert icons
The following warning signs are used in this document to
indicate and highlight areas of the associated text that require
particular attention by the user. A definition of the meaning of
each sign is as follows:
WARNING
Indicates a potentially hazardous situation. If not avoided,
it could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation. If not avoided,
it could result in injury. It may also be used to alert against
improper use.
NOTICE
Indicates a potentially hazardous situation. If not avoided,
it could result in damage to the product or environment.
3

Description

3.1

Product overview

1
2
1 Test head
2 Gel face II
3 Inlet for compressed air supply
4 Timer
5 Medium pressure gauge
6 Low pressure gauge
7 left control lever
8 right control lever
9 LEDs
10 11
10 USB port (Dräger Testor 3500)
11 Connector for high-pressure sensor (Dräger Testor 3500)
12 Medium pressure outlet
Safety information
7 8
6
5
12
en
4
9
3
00131313
00231313
17