Configuring The Tcp/Ip Protocol On A Macintosh Pc - 3Com HomeConnect 3CR29220 Getting Started Manual

NOTE: The numbers on your screen SHOULD be different
than those shown in the preceding example.

Configuring the TCP/IP Protocol on a Macintosh PC

You need to make sure the TCP/IP communications
protocol and an Ethernet device is installed on your system
before you install your cable modem. Many Macintosh
computers have Ethernet devices installed at the factory.
1 Click the Apple icon in the upper left corner of the Finder.
Scroll down to Control Panels, and click TCP/IP.
2 Click Edit on the Finder (gray bar) at the top of the screen.
Scroll down to the bottom of the menu and click User
Mode.
3 Click the Advanced button then click OK.
Configuring the TCP/IP Protocol 13