A-2
A
A: I
PPENDIX
NSTALLING
TCP/IP
N
C
ETWORKING
OMPONENTS
6 If the "Dial-Up Networking" box is not checked, click the box so that a
check appears. Then click OK. Click OK again. Windows will ask for the
Windows installation CD. Follow the on-screen instructions to install
Dial-Up Networking. When you are finished, close all open windows and
continue with the next section, "TCP/IP."
Next, verify that TCP/IP is installed.
1 Click Start, point to Settings, and then click Control Panel.
2 Double-click the Network icon.
3 A list of installed network components appears. Look for "TCP/IP ->
Dial-Up Adapter" in the list that appears (circled in the following screen
image). If this entry is present, close all open windows and go to the next
section, "SNMP Agent". If it is not, continue with step 4.