3Com HomeConnect 3CR29220 Getting Started Manual page 12

14 C 1: B Y
HAPTER EFORE
4 Click the Up/Down selector arrows (to the right of
"Connect Via") and click "Using DHCP Server".
5 Click the Options button. Then click the Active button.
NOTE: In some cases, the Load only when needed
button will not appear. If it is visible, click the box. A check
mark should appear in the box.
6 Verify that the "Use 802.3" box is unchecked (circled in the
following image). If there is a check mark in the box, click it
B
OU EGIN