Installing The Pc Card; Confirming Installation - 3Com OfficeConnect 3CXSH654B User Manual

10/100 lan + 56k global modem cardbus pc card
Table of Contents

Advertisement

20
C
4: W
HAPTER
INDOWS

Installing the PC Card

Confirming
Installation
95
1 Insert the Installation CD into the CD-ROM drive. The auto-start feature starts the
installation. If auto-start is disabled on your computer, click Start>Run and type
d:\setup.exe (where d: is your CD-ROM drive).
After you insert the Installation CD, you may see messages telling you that the
installation is preparing your system to run your LAN+Modem card. The messages
that you see depend on how your system was set up and what utilities you
have used.
2 Insert the PC Card into the PC Card slot as shown in Chapter 1.
3 Respond to the prompts as they appear.
During the installation process, you may receive prompts for the PC Card
Installation CD. Insert the CD and select the path from the drop-down list. Click
OK. The path is d:\install\disks\win9x\drivers, where d: is your CD-ROM drive.
During the installation process, you may receive prompts for the Windows 95
installation CD. Insert the CD and indicate the correct path.
If you have not previously installed networking, you may be prompted for
information about your network. See your network administrator for this
information.
4 You may be prompted to restart your computer.
Checking that the Network Interface is Present
1 Double-click the My Computer icon.
2 Double-click the Control Panel icon.
3 Double-click the System icon. The System Properties box appears, detailing your
system setup.
4 Click the Device Manager tab. A list of devices appears, arranged by type.
5 Double-click Network Adapters. The entry for the LAN+Modem card, SH654B -
3Com Officeconnect LAN + Global Modem-(Fast Ethernet), confirms successful
installation.
6 Double-click the entry for the LAN+Modem card to display a description of the
card and its current status. The device status should indicate "This device is
working properly."
7 Click Cancel to return to System Properties.
8 Click OK to exit System Properties.
Checking that the Modem is Present
1 Open the My Computer folder.
2 Double-click Control Panel.
3 Double-click System. The System Properties box details your system setup.
4 Click the Device Manager tab. A list of devices appears, arranged by type.
5 Double-click Modems. It should display the entry for the SH654B - 3Com
OfficeConnect LAN + Global Modem-(Modem).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Officeconnect 3c3sh654b

Table of Contents